NBI-12D nitrogen blowing instrument is a new type of nitrogen blowing instrument with high cost-effectiveness

Structural characteristics of NBI-12D nitrogen blowing instrument:
1. The NBI-12D nitrogen blower produced by our company has good heat transfer performance, uniform heat transfer, and is conducive to rapid heating and temperature control.
2. Blow nitrogen onto the surface of the sample to achieve anaerobic concentration of the liquid sample. Blow pipes are independent of each other and will not cause cross contamination.
3. The NBI-12D nitrogen blowing instrument has multiple hole numbers and corresponding blowing needles to choose from.
4. The NBI-12D nitrogen blowing instrument is specially designed with a water box inside to prevent accidental spillage of liquid during operation, in order to avoid damaging the internal circuit.
5. The overall temperature is more uniform and accurate, and the temperature will also be directly detected by sensors.
6. Four sets of digital displays respectively show the set temperature and actual temperature of the device.
7. A well-designed internal structure of the instrument allows it to operate at a relatively high constant temperature for a long time

Specifications and technical parameters of NBI-12D nitrogen blowing instrument:

Temperature range: Room temperature+5 ° C~150 ° C
Timed time: * 99 hours and 59 minutes in length
Temperature control accuracy: ≤± 0.5 ° C
Display accuracy: ± 0.1 ° C
Temperature uniformity @ 100 ° C: ≤± 0.5 ° C
Temperature uniformity @ 150 ° C: ≤± 1 ° C
Heating time (40-150 ° C): ≤ 30 minutes
*Large lifting stroke: 200mm
*Large gas flow rate: 15L/min
*High gas pressure: 0.02Mpa (using ≤ 16 gas needles)
Number of modules: 1
Heating power: 200W
Fuse: 250V 3A Ø 5 × 20
Dimensions (mm): 280X240X500
Weight (kg): 7