- Phone
-
Address
No. 281 Zhongshan North Road, Gulou District, Nanjing City
Product Categories
Nanjing Shengtong Automation Technology Co., Ltd
NJT460G-SS810C turbidity meter
NegotiableUpdate on 10/03
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The NJT460G-SS810C turbidity meter is an online monitoring instrument designed to measure the turbidity of water in municipal and industrial wastewater treatment processes. The principle that the transmittance of light is proportional to the turbidity of the measured wastewater is adopted. Can be applied to detect turbidity changes in biochemical treatment processes, providing continuous and accurate measurement results. Turbidity is a scattering phenomenon caused by colloidal particles suspended in water. Turbidity in water is mainly caused by substances such as soil, organic matter, and microorganisms. An increase in turbidity indicates that the water is contaminated with colloidal substances.
Product Details
Host model |
NJT460G |
Overall dimensions |
245*224*65.5mm |
Electrode model |
Low turbidity:SS810CHigh turbidity:SS810L |
material quality |
Transmitter:PCSensor: Flow typeABSThe input formula is316stainless steel |
measurement range |
Low turbidity(0-0.5)~400NTU High turbidity(0-5)~5000NTU |
process connection |
The circulating type is wall mounted installation The input sensor isG1pipe thread |
essence indeed degree |
±%5FS 10NTUThe error within the time limit is not greater than1NTU |
Cable length |
10Mi standard configuration (extendable) |
divide distinguish rate |
Low turbidity0.01NTUHigh turbidity0.1 NTU |
working environment |
transmitter-20~55℃ sensor Low turbidity0~60℃ High turbidity0~40℃ relative humidity≤85% |
mark fixed |
Standard liquid calibration or on-site comparative verification |
Protection level |
transmitterIP65 sensor Circulating typeIP65 /Investment styleIP68 |
apparent show |
LCDLCD (Liquid Crystal Display) |
||
switch signal |
4～20mA(Four wire system), maximum load750W |
||
Switch output |
2Programmable relays can be set as alarm functions And timing function; Capacity isAC230V，2A |
||
Digital interface |
RS485（ModBusAgreement) |
||
power supply |
AC220V±10%，50Hz(Optional)DC 24V） |
||
Process pressure |
≤0.3MPa(Input based) |
