NST860LS2/S3 integrated ultrasonic level gauge

NegotiableUpdate on 10/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

NST860LS2/S3 Integrated Ultrasonic Level Gauge NST860LS2/S3 Integrated Ultrasonic Level Gauge: Installed on the upper part of the container under the control of the electronic unit, the probe emits a beam of ultrasonic pulses towards the measured object. Sound waves are reflected by the surface of an object, and some of the reflected echoes are received by the probe and converted into electrical signals. The time from ultrasonic emission to re reception is proportional to the distance between the probe and the object being measured. The electronic unit detects the time and calculates the measured distance based on the known sound speed. The level value can be obtained through subtraction operation.

Product Details

Host model	NST860LS3 (integrated three wire), NST860LS2 (integrated two wire)	Digital interface	RS485 (ModBus protocol)
Electrode model	Integrated: LXX (XX represents range)	Switch output	2 sets of programmable relays, which can be set as alarm function and timing function; Capacity is AC230V, 5A
measurement range	2m, 4m, 8m, 12m, 15m (optional)	Power supply	AC220V±10%，50Hz、DC24V
Resolution	1mm	Material	The transmitter is ABS and the sensor is ABS
Accuracy	±10mm	Installation method	Bracket installation, flange installation
Blind spot	0.4~0.6m	Protection level	IP65 transmitter, IP67 sensor
display mode	LCD display	Operating Temperature	Transmitter -20~55 ℃, sensor -20~60 ℃
Launch angle	6°～12°	Applicable fields	Water and sewage treatment: pump room, collection well, biochemical reaction tank, sedimentation tank, sludge storage tank; Electricity Mining: gray mud, coal slurry, water treatment.
analog output	4-20mA (split four wire system), maximum load 750W (integrated two wire system/three wire system/four wire system optional)	Applicable fields