OBO V10-C C-class power lightning arrester

NegotiableUpdate on 10/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The V10-C series surge protector is designed according to the requirements of IEC61643 and IEC60364, and the device complies with DINVDE0675Part6 (Draft 11.89) A1 and A2, with a grade of C+D.

Product Details

The V10-C series surge protector is designed according to the requirements of IEC61643 and IEC60364, and the device complies with DINVDE0675Part6 (Draft 11.89) A1 and A2, with a grade of C+D.
V10-C is used for induction lightning protection of sensitive electronic equipment in buildings, and can be used as a second level power line surge protector in buildings with lightning protection levels of III and IV. It is installed in the distribution cabinet at the junction of LPZ1 and LPZ2, and LPZ2 and LPZ3 zones inside the building.
If the lightning arrester is damaged due to overload, the built-in circuit breaker will promptly operate, interrupt the connection with the power supply, and the color of the fault indication display window will change from green to red.
V10-CCharacteristics and advantages of lightning arrester

feature	Advantages of use
Metal oxide varistor	Lightning arresters can handle frequent actions and have a long lifespan
Equipped with a working status indicator light	Safe to use, the working status of the lightning arrester is clear at a glance
compact design	Save installation space
Adopting a 3+1 structure	Suitable for multiple power supply systems

V10-CTechnical parameters of lightning arrester

model	V10-C/0	V10-C/2	V10-C/3	V10-C/4	V10-C/3+NPE
According to the classification level of VDEO675 Part 6	C+D category
protected mode		L-PE、N-PE	L-PE	L-PE、N-PE	L-N、N-PE
Maximum continuous operating voltage Uc	385V~
Lightning protection zone LPZ	1 → 2 or 2 → 3
Nominal discharge current (8/20 μ s) In	10KA	20KA	30KA	40KA	30KA
Maximum discharge current (8/20 μ s) Imax	20KA	40KA	60KA	80KA	60KA
Voltage protection level Up	≤1.8KV
Response time Ta	＜25ns
Maximum backup fuse with short-circuit withstand capacity of 25KA	125A gl/gG
Working temperature range	-40 ℃ to+80 ℃
protection level	According to EN50052, fixed on a 35mm guide rail
Installation method	2.5-35mm2 (single strand, multi strand wire)
I Protection Level	IP 20
Connecting wire cross-sectional area single/multiple/multiple flexible wires	2.5-25mm2 (multi strand flexible wire with protective sheath at the connection end)