OBO V50-B+C/3+NPE power lightning arrester

1、 Function&Features
function
The OBO V50-B+C high-energy lightning arrester contains a special varistor circuit composed of zinc oxide varistors with excellent nonlinear characteristics (a>30). This enables the lightning arrester to achieve maximum protection even under high-energy overvoltage surges. Its protection level is that under a 12.5KA/(10/350) impulse, the residual voltage does not exceed 1.3kV. Therefore, this lightning arrester can withstand partial lightning current from direct lightning strikes. When a line overload occurs, the circuit breaker inside the lightning arrester will automatically disconnect the failed lightning arrester module from the main circuit, and the color of the display window used to monitor the working status on the module will change from green to red.
application
When the building itself is equipped with an external lightning protection system (such as installing lightning rods, down conductors, grounding grids, and external shielding), according to the relevant theories of IEC and VDE, OBO is adopted on the 380V/230V low-voltage distribution circuit inside the buildingV50-B+C/3+NPE/FSEstablishing lightning protection equipotential connections on power lines can avoid the hazards of fire, explosion, and personal injury caused by lightning strikes.
special configuration
ASSound and light alarm moduleA functional base with sound and light alarms, supplying a 220V single-phase mains power to the base. Under normal circumstances, the light displays green, etc. When a module is damaged, the alarm light changes from green to a flashing red light, accompanied by a "beep beep" alarm sound, reminding maintenance personnel to replace it.
FSRemote signaling contact moduleEquipped with a remote signaling contact function base, terminals 1-2 (normally open contacts) or 1-3 (normally closed contacts) can be selected for connection according to actual needs. And terminal wiring can use 0.14-2.5mm2 multi strand wire or single core wire.
two、Technical Specifications

model	V50-B+C
Normal operating voltage UN	230V~
Maximum continuous operating voltage UcAC UcDC	280 450
According to VDE 0675, Part 6 classification level	B
Voltage protection level Up under 5KA (8/20) surge current	<1.3KV
Maximum throughput of a single module Iimp (10/350us)	12.5KA
According to the IEC1312-1 and ENV61024-1 standards, the measurement value is measured using the (10/350) direct lightning pulse current waveform test Peak current ismax Electricity Q 特定能量 W/R	12.5KA 12.5AS 160 KJ/W
Maximum fuse specification capable of withstanding a short-circuit current of 25Karpm	160A gl
Selection range of connecting wires	2.5-35mm2
install	According to DIN EN50052 standard requirements, fixed on a 35mm wide metal guide rail
Color module base	orange orange
weight	700g
material	polyimide
Volume (length * width * height)	90mm*89mm*62mm

Attention: It is not allowed to wire protected lines in parallel with unprotected lines or ground wires.