-
E-mail
wh@yk17.cn
-
Phone
13971692521
-
Address
Room 326, Huakai Science and Technology Center, Ruichuang Center, Building 45, Badajia Garden, No. 2 Gongye Road, Qingshan District, Wuhan City
Product Categories
Wuhan Mingyou Tech Technology Co., Ltd
Online Smoke Monitoring System SWG200-1
NegotiableUpdate on 07/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Online smoke monitoring system CEMS, used for process control and environmental monitoring or scientific experimental research analysis of smoke online monitoring system, can monitor CO, CO2, O2, NO, NO2, SO2, HC in real time. Designed for different industrial sites, it has built-in preprocessing system, blowback system, automatic calibration system, self diagnostic system, and data remote transmission system. It adopts direct sampling and is suitable for various harsh industrial sites.
Product Details
Online Smoke Monitoring System SWG200-1
The online flue gas emission monitoring system SWG200-1 is used to control and monitor the emission content of combustion or industrial process monitoring and analysis.
The standard type can measure or display the following components:
|
measuring principle |
Non dispersive infrared principle ,Single light source with electronic modulation, single light wave system, multi-component detector（ CO， CO2 ， CH4 ），
Long life electrochemical sensors（ O2 ， CO， NO， NO2 ） |
|||
|
Measure composition and range |
CO: |
0 – 200 / 1000 ppm |
CO2: |
0 - 20.0% |
|
SO2: |
0 – 200 / 1000 ppm |
O2: |
0 - 21.0% |
|
|
NO : |
0 – 200 / 1000 ppm |
NO2 |
0 – 200ppm |
|
|
Calculated value |
CO [mg/m3]; NO x as NO2[mg/m3], SO2[mg/m3] |
|||
|
Response time |
20 Starting from entering the interface of the analyzer in seconds |
|||
|
display |
liquid crystal LCDDisplay, with built-in backlight |
|||
|
printer |
Thermal printer, printing paper width 58 mm |
|||
|
Sampling pump condition |
Built in Peltier cooler for cooling temperature to = + 5℃ ,Filter particle size less than 1μ |
|||
|
ambient temperature |
+ 5℃ to + 40℃ ,Relative humidity is high in the air 95%,non-condensing |
|||
|
External dimensions |
880×600×575mm (deep xwide xtall ) |
|||
|
weight |
make an appointment 90 kilogram |
|||
|
protection grade |
IP54 |
|||
|
power supply |
230VAC, 50 to 60Hz, up to 600W |
|||
|
signal output |
8 Road simulation output ,One signal for each gas 4-20mA, PCRS232Data transmission to PC |
|||
fuel
It can measure and analyze all types of liquid, solid, and gaseous fuels, or users can set and choose their own fuel type!
Simple description
＊ Continuous emission measurement is based on the use of infrared sensors and long-life electrochemical sensors.
＊ SWG 200-1Installed near the gas sampling point, the instrument is in close proximity to the sampling point This can shorten the response time of the instrument.
＊ The standard gas pipeline length is10Rice.
＊ SWG 200-1Equipped with a complete sampling system.
＊ SWG 200-1Contains standard digital data interfaces and 0/4-20mAAnalog Output.The measurement data can be provided through this output.
＊ The analyzed data and service data can be directly displayed in SWG 200-1The front display screen.
＊ SWG 200-1Designed for continuous measurement. So it is necessary to perform automatic zeroing at least once a day, which can be done through the software settings.
＊ 230V/50HzThe power cord, gas sampling pipeline, condenser outlet, and data cable can be connected through the inlet at the bottom of the casing.
＊ SWG 200-1Installation requirements: dry, windproof, rainproof, temperature range +5℃ arrive +45℃.
hardware
＊ All hardware is packed in a steel box(Re agree30kg,protection grade IP 43,belt4Install bolts on the wall)
＊ Lockable organic glass door
＊ On site operation keyboard with backlightLCDDisplay measurement data.
＊ A complete and sophisticated sampling system:
＊ Gas sampling pump
＊ Gas Cooler
＊ Automatic condensate discharge
＊ The filtering unit is suitable for smoke and ambient air
＊ Flow meter with needle valve
＊ Automatic adjustment three-way solenoid valve
＊ Microprocessor circuit motherboard
Suitable for continuous monitoring, analysis, and control measurement of combustion equipment devices in all industries (thermal power plants, steel plants, petroleum refineries, chemical plants, laboratories, heating/drying equipment, etc.) and various equipment that requires testing such as engines, turbines, automotive exhaust and turbine emissions testing, as well as various boilers and boiler containers.
Suitable for CEMS comparison testing and environmental monitoring of flue gas online monitoring systems, process analysis and control!
-----------------------------------------------------------------------------
Provide pressure calibrators, pressure calibration stations, temperature calibration furnaces, and blackbody furnaces
Dew point meter, gas detector, flue gas analyzer
