Organic fertilizer coating machine

Product Introduction

The supporting equipment of the coating machine includes screw conveyor, mixing tank, oil pump, main engine, etc. Can effectively prevent compound fertilizer from clumping. This machine adopts polypropylene lining or acid resistant stainless steel.

Coating machine

According to the process requirements, the coating machine has been specially designed in its internal structure and is an effective specialized equipment for compound fertilizers.

Working principle

The working principle of the organic fertilizer particle laminating machine is that the belt and pulley are driven by the main motor, the driving shaft is driven by the reducer, and the split gear installed on the driving shaft is connected and fixed to the cylinder with the large gear ring. Raw materials are added from the feeding end through the interior of the cylinder. Mix with powder (liquid) and flow out from the discharge outlet.

Structural composition

The whole machine can be divided into five main parts:

1. Bracket part: The rotating part of the entire bracket is supported by the bracket, with a high force. Therefore, the onboard components are welded from medium carbon steel plates and channel steel, and achieved the purpose of the machine tool through strict quality control and special process requirements. In addition, more importantly, the support rollers are fixed on the shelves. Due to the high friction generated by the roller belt, the factory deliberately selects high-quality anti-corrosion and wear-resistant materials, greatly improving the service life. Machine. This carrier is also combined with casting technology. In addition, there are hooks at the four corners of the bracket for easy loading and unloading.

Transmission part of coating machine

2. Transmission part: The transmission part of the entire granulator is particularly important for the operation of the entire body. The transmission frame is welded with high-quality channel steel and meets strict quality requirements. The main motor and reducer installed on the transmission frame are selected from ISO reliable products with reliable quality. The motor drives the pulley, V-belt, and reducer to the main shaft, making the machine work. The transmission reducer and the main shaft working part are driven by a nylon pin coupling.

3. Large gear ring: fixed on the body, working on the opposite side of the body from the gear and small gear. It uses high-tech wear-resistant materials to give the machine a longer service life.

4. Rolling strip: fixed on both sides of the cylinder to support the entire cylinder.

5. Cylinder section: The core of the entire coating machine is the cylinder section, which is welded from carbon steel plates and manufactured through strict quality control and specific process requirements.

Technical Parameter