Peel strength tester, tensile and compressive testing equipment, Shanggao brand tensile testing machine

Peel strength tester, tensile and compressive testing equipment, Shanggao brand tensile testing machine

Peel strength tester, tensile and compressive testing equipment, Shanggao brand tensile testing machine

Peel strength tester, tensile and compressive testing equipment, Shanggao brand tensile testing machine

Peel strength tester, tensile and compressive testing equipment, Shanggao brand tensile testing machine

Peel strength tester, tensile and compressive testing equipment, Shanggao brand tensile testing machine

Peel strength tester, tensile and compressive testing equipment, Shanggao brand tensile testing machine

Equipment Name: Computer Peel Strength Tester

Equipment model: SGL-8000

Manufacturer: Suzhou Shanggao Testing Equipment Co., Ltd

SGL-8000 computerized tensile and compressive strength tester

Product Introduction：

This product can mainly measure the tensile strength, compressive strength, compressive strength, tear resistance, peel resistance, adhesive strength, and physical properties of various materials. The test date, time, and display settings can be printed out. This machine can be equipped with various fixtures and elongation testing devices, or configured according to customer requirements. It is the basic equipment for quality management, incoming inspection, physical property testing, mechanical research, and material development.

Function:

1 can be subjected to tension and static pressure、Tests such as peeling, tearing, release force, three-point bending resistance, fixed force, fixed stroke, bending, etc;

2Can display both strength and deformation simultaneously; The time corresponding to strength; Displacement corresponding to time; The displacement curve corresponding to force;

3 built-in metric and imperial units, can be switched freely;

4 quick disconnect test connectors that can be quickly replaced using various fixtures;

5 can be directly connected to a printer to output reports, and the report format can be edited by customers themselves;

6. Fully computerized operation for machine control, data analysis, printing reports, and other functions;

7 transmission modes: ball screw, equipped with dust cover, protecting the screw, increasing service life and accuracy;

8 ultra-low silence, intelligent automatic power consumption adjustment, more energy-efficient and environmentally friendly；

9. Hardware security protection: upper and lower limits, emergency stop button protection.

10 Delivery:One set of standard testing fixtures;

Technical parameters:

1. Capacity selection: 5, 10, 20, 25, 50, 200 kg (optional);

Switching between 2 units: G, kg, N, LB;

3 load decomposition degree: 1/250000;

4. It is possible to set the pressure to the set force value and maintain it for a set time;

5 Load accuracy: within ± 0.5%;

6 strokes: 600mm (excluding fixtures);

7 Test speed:1～500mm/minAdjustable speed at will;

8. Dimensions: (L × W × H) 500 × 440 × 970mm;

9 Weight: 75kg;

10 Power supply: 1 ∧, 220V, 3A;

Features of control and data processing software functions:

1. Chip integration technology, data acquisition and amplification system, with advantages such as high integration and convenient use. The control software can automatically obtain detection data such as tensile strength, yield strength, fracture strength, elastic modulus, elongation, etc. Open formula editing can automatically calculate the force, stress, displacement, deformation and other data results at any point during the test process. The control and data processing of the experimental process comply with the requirements of the corresponding metal and non-metal material standards.

2. Control methods: Optional control methods include constant speed, displacement, load, load increase rate, constant stress, constant stress increase rate, constant strain, and constant strain increase rate;

3. Automatic zeroing: After the experiment begins, the measurement system automatically resets to zero;

4. Automatic shifting: automatically switches to the appropriate range according to the load size to ensure the accuracy of measurement data;

5. Automatic saving: automatic saving of experimental data and conditions, data loss caused by forgetting to save;

6. Batch test: For samples with the same parameters, a batch of tests can be completed sequentially after one setting;

7. Display mode: Data and curves are dynamically displayed during the experimental process;

8. Curve traversal: After the experiment is completed, the curve can be reanalyzed by using the mouse to find the data corresponding to each point on the experimental curve;

9. Curve selection: stress-strain, force displacement, force time, displacement time and other curves can be selected for display and printing;

10. Unit switching: Force units: (g, kg, N, lb), stress units: (kg/mm2, N/mm2, Mpa, lbf/in2), displacement units: (m, mm, in)

11. Test report: The test report can be programmed and printed in the format required by the user, and can be exported as an EXCEL file;

12. Security protection: When the load exceeds 2-10%, automatic security protection is implemented;

13. It can automatically detect and calculate the mechanical performance indicators of the sample, and can also manually intervene in the analysis process. According to the requirements of relevant standards, the automatic analysis results can be corrected to improve the accuracy of the data

Test software interface: