-
E-mail
pscaiyunhengtong@163.com
-
Phone
15888094105
-
Address
Next to Tianyangchen Village Committee, Jiulonghu Town, Zhenhai District, Ningbo City
Product Categories
Ningbo Hongwang Instrument Co., Ltd
Programmable saline spray tester
NegotiableUpdate on 12/29
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Programmable salt water spray tester This salt spray corrosion test chamber can be used to assess the salt spray corrosion resistance of materials and their protective layers, and to compare the process quality of similar protective layers, as well as to assess the salt spray corrosion resistance of some products. The equipment can reach any temperature point between room temperature and 55 ℃ in the experimental workspace and maintain a constant temperature.
Product Details
Brief Introduction
ProgrammableSalt water spray testerstem or root of plantsSalt spray corrosion test chamberIt can be used to assess the salt spray corrosion resistance of materials and their protective layers, as well as to compare the process quality of similar protective layers. It can also be used to assess the salt spray corrosion resistance of certain products. The equipment can reach any temperature point between room temperature and 55 ℃ in the experimental workspace and maintain a constant temperature.
Detailed Introduction
The programmable salt water spray tester is used to manufacture the equipment with 8mm corrosion-resistant PVC plastic sheet, which will not affect the test results. In the design work of this equipment, the internal and external pressures are balanced, and salt spray will not directly spray onto the sample. Moreover, the design takes into account the generation of condensation water at the top, inner walls, and other parts of the equipment. Therefore, during the testing process, condensation water will not drip onto the sample and affect the test results.
This equipment is equipped with the test solution preparation method specified in the national standard.
Programmable saline spray testing machine technologyartfingertreetop
l Inner box size: 900 * 600 * 500 * mm (W * D * H *)
l Outer box size approximately: about 1400 * 800 * 1285 * mm (W * D * H *)
l Temperature range: RT+35 ℃~55 ℃
l Saturation bucket range: RT+47 ℃~63 ℃
l Humidity range: 85-90% R · H
l Temperature uniformity: ± 2 ℃
l Temperature fluctuation: ± 0.5 ℃
l Spray sedimentation: 1~2ml/80cm2 · h
l Spray mode: continuous
l Total power: 2 KW. This picture is for reference only. The actual product shall prevail.
Heating and spray system control of programmable saline spray tester
l This salt spray corrosion test chamber adopts a U-shaped alloy rapid heating electric heating tube, which is a completely independent system. Does not affect the salt spray test and control circuit. The output power of temperature control is calculated by a microcomputer to achieve accuracy and efficiency in electricity consumption;
l The tower spray (with adjustable tower tip) is adopted, and the nozzle made of special quartz glass is adopted;
l Spray mode: continuous, interval optional;
Test timing range: 0-999 hours, minutes, seconds, any setting.
l Test box overheating and water shortage protection
l Saturator over temperature and water shortage protection
l Test operation instructions
l End of experiment instruction
l Saturator liquid level observation display
l External observation of salt spray deposition shows
Heating and spray system control of programmable saline spray tester
l This salt spray corrosion test chamber adopts a U-shaped alloy rapid heating electric heating tube, which is a completely independent system. Does not affect the salt spray test and control circuit. The output power of temperature control is calculated by a microcomputer to achieve accuracy and efficiency in electricity consumption;
l The tower spray is adopted (the tower tip can be adjusted);
l A nozzle made of specially made quartz glass firing;
l Spray mode: continuous, interval optional;
Super salt water tank can continuously spray for 72 hours without adding salt water
Programmable saline spray test machine controlmakesystem
The temperature control adopts P.I.D+S.S.R, and the system is coordinated and controlled in the same channel, which can improve the stability and service life of control components and interfaces; It has the function of automatic calculation of P. I. D, which can reduce the inconvenience caused by manual setting. When an error occurs during the operation or setting of the device, a warning signal will be provided.
The time controller of the equipment controls the time required for the experiment and is easy to operate. When the device reaches the set time of operation, it automatically stops the test and enters a state of equilibrium to cool down.
Temperature control of programmable brine spray testersystem
l Intelligent precision digital PID controller
l Control accuracy: ± 0.1℃
l Temperature sensor: PT100 platinum resistance thermometer.
l Test timing range: 0-999 hours, minutes, seconds, any setting.
l Test box overheating and water shortage protection
l Saturator over temperature and water shortage protection
l Test operation instructions
l End of experiment instruction
l Saturator liquid level observation display, salt spray settlement external observation display
Standard installation of programmable saline spray tester：
14 V-shaped/O-shaped storage racks and 2 measuring cylinders
Two temperature indicator needles and two collectors
Five glass nozzles, 2 tubes, six humidity cups, 1 cup
Seven glass filters, one eight spray tower, one set
One set of nine automatic water addition system and one set of ten defogging system
Programmable saline spray tester accessories:
Two bottles of test drug sodium chloride (500g/bottle)
1 copy of operation manual
5Lmeasuring cup 1individual
Similar Product Recommend