QT-6105S 50kN servo universal material testing machine

1、 Machine Description:

QT-6105S servo universal material testing machineFull digitalization is adopted during the testing processpower、displacement、speedThree loop control, usingTaiwan exchange servo motor and control drive system, cooperateHigh precision gearboxandTaiwanTBI precision ball screwDrive to achieve optimal transmission efficiency and signal-to-noise ratio.

This machine is mainly used for detecting metal and non-metal material productsstretch、Anti compression、peel off、tear、anti-bending、Three point anti bending、shear resistanceWaiting for physical performance. At the same time, testing and data processing can be conducted according to various standards provided by GB, ISO, JIS, ASTM, DIN, and users. widely used inAutomotive parts, fasteners, aerospace, wire and cable, rubber and plastic, paper packagingMaterial inspection and analysis in the industry. It is a testing equipment required by research institutes, colleges and universities, industrial enterprises, technical supervision, and commercial inspection arbitration.

2、 Technical specifications:

1. Maximum test force: 50kN;

2Accuracy level of testing machine:Level 0.5;

3. Test force measurement range: 2% -100% FS;

4Relative error of test force indication: indication of±Within 0.5%;

5Test power resolution: maximum test power1/±500000 (with constant resolution throughout the entire process);

6Relative error of displacement indication: indication ofWithin ± 0.5%;

7Displacement resolution:0.0005mm；

8Range of force control rate adjustment:0.1-2%FS/S；

9Relative error of force control rate: set value±Within 0.5%;

10Range of speed adjustment for crossbeam:0.05—500mm/min；

11. Relative error of crossbeam speed: within 0.5% of the set value;

12Constant force, constant deformation, constant displacement control range:0.5%--100%FS；

13Constant force, constant deformation, constant displacement control accuracy: set valueWhen<10% FS, it is within ± of the set valueWithin 0.5%; When the set value is ≥ 10% FS, it is within ± 0.1% of the set value;

14. Maximum stretching stroke: 1100mm;

15. Effective stretching space (net space): about 680mm;

16Effective test width:420*420mm；

17Overall dimensions of the host (length)X Width x Height):950*600*2030mm；

18power supply220V 50Hz 1.5kW；

19. Host weight: approximately 600kg.

3、 Features of control and data processing software functions:

1. Advanced chip integration technology, professionally designed data acquisition and amplification system, with advantages such as high integration, stability and reliability, and easy use. Control software can achieve automatic calculationtensile strength、yield strength、Fracture strength, elastic modulus、elongationWaiting for detection data,Open formula editingIt can automatically calculate the force, stress, displacement, deformation and other data results of any specified point during the experimental process. The control and data processing of the experimental process comply with the requirements of the corresponding national standards for metallic and non-metallic materials.

2. Control method:Control methods such as constant speed, positioning displacement, constant load, constant load rate, constant stress, constant stress rate, constant strain, and constant strain rate can be selected;

3. Automatic zeroing: After the experiment begins, the measurement system automatically resets to zero;

4. Automatic shifting: automatically switches to the appropriate range according to the load size to ensure the accuracy of measurement data;

5. Automatic saving: Test data and conditions are automatically saved to prevent data loss caused by forgetting to save them;

6. Batch test: For samples with the same parameters, a batch of tests can be completed sequentially after one setting;

7. Display mode: Data and curves are dynamically displayed during the experimental process;

8. Curve traversal: After the experiment is completed, the curve can be reanalyzed by using the mouse to find the data corresponding to each point on the experimental curve;

9. Curve selection: stress-strain, force displacement, force time, displacement time and other curves can be selected for display and printing;

10. Unit switching: Force units: (g, kg, N, lb), stress units: (kg/mm2, N/mm2, Mpa, lbf/in2), displacement units: (m, mm, in);

11. Test report: The test report can be programmed and printed in the format required by the user, and can be exported as an EXCEL file;

12. Security protection: When the maximum load exceeds 2-10%, automatic security protection is implemented;

13. It can automatically detect and calculate the mechanical performance indicators of the sample, and can also manually intervene in the analysis process. According to the requirements of relevant standards, the automatic analysis results can be corrected to improve the accuracy of the data;