Salt spray alternating test chamber

NegotiableUpdate on 01/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The salt spray alternating test chamber is designed for surface treatment of various materials, including coatings, electroplating, inorganic and organic films, anodizing, rust proof oil and other anti-corrosion treatments, to test the corrosion resistance of their products.

Product Details

Salt spray alternating test chamber

Product Introduction

　　Salt spray alternating test chamberIt is aimed at surface treatment of various materials, including coatings, electroplating, inorganic and organic films, anodizing, anti rust oil and other anti-corrosion treatments, to test the corrosion resistance of their products.

Control method

1.KB-Y-60The Bernoulli principle is used to extract salt water and then atomize it uniformly, which can prevent crystallization and ensure the standard of continuous testing.

2. Nozzle: made of special glass nozzle, which can adjust the size of spray volume and spray angle.

3. spray volume: spray tower is set in the middle of the laboratory to make the fog fall evenly, and can be adjusted to 1~2 ml 80 cm2/hr (16 hour average volume)

Technical Specifications

studio dimensions	600×400×450mm （L×W×H）
parseprecision	± 0.1℃
controlprecision	± 1.0℃
distributionessencedegree	± 2.0℃
Test Method	1.Salt water spray test: NSS, ACSS (1) Laboratory: 35℃±1℃ (2) Saturated air tank: 47℃±1℃ 2.Acetate salt spray test:NSS，ACSS （1）Laboratory:50℃±1℃ （2）Saturated air tank:63℃±1℃ Add acetic acid with ice to adjust the pH value of the test solution to 3.1~3.3 3. Copper speed test: CASS (1) Laboratory: 58 ℃±1℃ (2) Saturated air tank: 65 ℃±1℃ Add acetic acid with ice to adjust the pH value of the test solution to 3.1~3.3, and mix with 0.02~0.025% copper chloride

product structure

laboratory	adoptP.V.CPolyvinyl chloride board, thickness5Mm, heat-resistant up to 80℃
sealing cover	Made of acrylic impact resistant board, thick6Mm, transparent sealing cover, real-time observation of the condition of the tested product
pressure tank	adoptSUS#304Stainless steel high-pressure resistant barrel, insulated
heating system	Using imported stainless steel finned heat pipe U-Type electric heater to heat the air
shelf	Using a planar indexing frame, the angle can be adjusted arbitrarily, and the four sides are consistent in terms of falling and receiving fog, with a large number of test pieces placed.
Control Panel	◆ Laboratory temperature controller0-99.9℃, LCD digital display hasPIDAutomatic calculation, control error ±0.3℃ ◆ Saturated air tank temperature controller0-99.9℃, LCD digital display hasPIDAutomatic calculation, control error ±0.3℃ ◆ Heating tank liquid expansion safety temperature controller0-120℃ ◆ Saturated air tank liquid expansion safety temperature controller0-120℃ ◆ Digital display time controller0.1s-9990hr ◆ Accumulator0-9990hr ◆ Swing board illuminated buckle switch, capable of continuous buckle pressing20000time

protective device

1Automatic power-off device when the water level is low

2Automatic power-off device when overheating occurs

3Equipped with safety warning light device

main controller

AC contactor: Taiwan, China

Thermal relay: Taiwan, China, China

Communication relay: OMRON,

Time relay: Taiwan, China, China

Controller: Taiwan, China

Over temperature protector: Taiwan, China

Main power switch: Taiwan, China

Solid state relay: Taiwan, China, China

Button switch: Taiwan, China

Dry burn protector: Italy

Additional notes

Voltage used:	1.power supply:AC1￠3W 220V 50/60HZ※ Voltage fluctuation allowable value:Freeze voltage ±10% 2. load capacity:3.0KVA 3. operating current:15A
use water want Request:	ROReverse osmosis pure water or distilled water
Usage environment:	Allow use in an environment of 0~30 ℃ Performance guarantee environment: 5~25 ℃ The installation ground should not have obvious inclination No other items can be placed within 60CM around the instrument
Accessories:	1．LType storage rack 4 pieces 2Standard measuring cylinder 1branch 3Temperature indicator needle 2branch 4．OType storage rack 6branch 5. Collector 80㎝ 1branch 6Glass nozzle 1branch(Please replace regularly) 7. Sodium chloride test drug（NACL）500gram 2 bottles 8. One 2.5m long low resistance rubber cable for the power cord
Items excluded from valuation:	1. Preparation project for setting up the venue 2. Input side electrical equipment 3. Natural drainage piping engineering 4. Drainage outlet equipment 5. Gas source 6. Mist exhaust port
Provide documents:	1. Provide a copy of the order specification sheet when placing an order 2. Provide a copy of the user manual upon delivery 3. Provide a copy of the product warranty card upon delivery

Common questions and answers about salt spray test chamber:

What are the components of the salt spray test chamber?

A normal salt spray test chamber consists of 8 parts, namely: exposure chamber, humidity and temperature control, spray device, air saturator, salt spray collection device, air dryer, exhaust system, and drainage system. None of the above 8 parts is necessary. Other parts can be added according to the actual needs of customers.

What are the testing standards for salt spray test chambers?

The salt spray test standard is a clear and specific specification for the conditions of the salt spray test, such as temperature, humidity, concentration of sodium chloride solution, and pH value. In addition, it also puts forward technical requirements for the performance of the salt spray test chamber.

How much is a salt spray test box?

We are a manufacturer of salt spray test chambers, and there are no middlemen to profit from price differences. The price of salt spray test chambers is not fixed, and it will vary depending on the function, quantity, material, and whether it is customized. For detailed quotation plans, please feel free to call in the upper right corner of the website.

Which is a good salt spray test chamber?

The salt spray test chamber is one of the equipment used for conducting salt spray tests on products. There are many manufacturers of salt spray test chambers now, but the quality varies greatly. When choosing a salt spray test chamber, it is recommended to look for a company with high brand awareness, long establishment years, and non-standard customization capabilities. The product quality is guaranteed, and the after-sales service is relatively complete.

Guangdong Kebao Experimental Equipment Co., Ltd. has been focusing on constant temperature and humidity test chambers, constant temperature and humidity machines, cold and hot impact test chambers, high and low temperature impact test chambers for many yearssalt spray test chamberEquipment such as UV aging test chamber and sand and dust test chamber. Welcome to call for consultation:

Tag: Salt Spray Test Chamber