Salt spray test chamber

Salt spray test chamberPriceSalt spray test chamberManufacturerbrand

1Technical Specifications

Specification and model: HE-YW-60/90/120/160/200

Capacity: 108 liters, 270 liters, 600 liters, 800 liters, 1200 liters

Inner box dimensions: 600 * 400 * 450, 900 * 600 * 500, 1200 * 1000 * 500, 1600 * 1000 * 500, 2000 * 1200 * 500 (MM)

Dimensions: 1070 * 600 * 1180, 1310 * 880 * 1280, 1900 * 1300 * 1400, 2300 * 1300 * 1400, 2700 * 1500 * 1500 (MM)

Salt bucket capacity: 15 liters, 25 liters, 40 liters, 40 liters, 40 liters

Laboratory temperature: RT~50 ℃

Pressure bucket temperature: RT~63 ℃

Heating rate: Laboratory temperature RT →+50 ℃ ≤ 40 min

Pressure bucket temperature RT →+63 ℃ ≤ 35 min

Relative humidity ≥ 85% HR

Temperature resolution: 0.1 ℃

Temperature deviation: ± 1 ℃

Temperature uniformity: 1 ℃

Temperature fluctuation: ± 0.5 ℃

Spray volume: 1~2mL/80cm ² 1hr (collect for at least 16 hours and take the average value)

Spray pressure: 1.00 ± 0.01kgf/cm ²

酸碱值 PH： 中性6.5～7.2 酸性3.0～3.3

Control time: 1S~9999H can be set arbitrarily

Neutral test method: (1) Laboratory: 35 ℃± 1 ℃ (2) Saturated air tank: 47 ℃± 1 ℃

Acid test method: (1) Laboratory: 50 ℃± 1 ℃ (2) Saturated air tank: 63 ℃± 1 ℃

2、 Characteristics

1. It has an automatic/manual water addition system, which can automatically replenish the water level when the water level is insufficient, and the test will not be interrupted.

2. The temperature controller uses digital display, and the PID control error is ± 01 ℃;

3. Double over temperature protection ensures safe use when the water level is insufficient.

4. The laboratory adopts steam direct heating method, with fast and uniform heating speed, reducing standby time

5. The precision glass nozzle is evenly dropped and diffused through the conical disperser of the spray tower with adjustable fog and fog volume, and naturally falls on the test card, ensuring that there is no blockage of crystal salt.

3、 Structural features

Laboratory: Made of PVC gray impact resistant board with a thickness of 5m/m and a temperature resistance of up to 80 ℃ (the laboratory is sealed with water to ensure that corrosive gases inside the box do not leak)

Thermostatic water bath: made of PVC gray impact resistant board with a thickness of 5m/m, and equipped with an automatic water level controller, eliminating the inconvenience of manual water addition.

Reagent replenishment bucket: concealed with water level gauge, made of PVC gray impact resistant board, with a thickness of 5m/m, integrated with the appearance of the machine.

Laboratory cover: made of transparent acrylic. Thickness 5mm (sealing cover is manually pushed)

Laboratory basket frame: made of PVC gray impact resistant board, with adjustable test angles of 15 º and 30 º, 4 V-shaped support frames, and 6 support rods.

Saturated air tank: made of SUS # 304 stainless steel plate, with a thickness of 2m/m, and equipped with an automatic water level controller, eliminating the inconvenience of manual water addition. The stainless steel high-pressure resistant tank has insulation effect.