Schneider APC's Smart UPS VT, rack mounted, 40kVA, 400V, with PDU and power on service

SUVTR40KHS

Characteristics of SUVTR0KHS

APC's Smart UPS VT, rack mounted, 40kVA, 400V, with PDU and power on service

• On site replaceable power distribution panel
  Ensure compatibility of devices with different plug types
• Locking room
  Prevent unauthorized access to UPS
• Multiple cable entry points
  Provide flexibility for UPS placement in the computer room to facilitate cable installation to the terminal block
• Resettable circuit breaker
  Can quickly recover from overload events.

Smart UPS VT features and advantages

Manageability

• SmartSlot Slot Slot
  Customize UPS performance using management cards
• Programmable frequency range
  Ensure compatibility with different input frequencies
• LED status indicator light
  With the help of video indicators, device and power status can be quickly understood.
• LSD monitor
  Alphanumeric display, displaying system parameters and alarms.
• Audible Alarm
  Provide notification of changes to the conditions of the mains and UPS power supply
• Compatible with Yingfei Manager
  In order to achieve centralized management through APC's Yingfei Manager software.
• network management
  Realize remote power management for UPS through the network.

Serviceability

• No need to replace the battery with tools
  Can quickly and conveniently replace batteries
• Automatic self check
  Regularly self check the battery to ensure early detection of batteries that need to be replaced.
• The module has been installed and can be shipped
  Capable of segmented transportation and testing of UPS before installation, as well as rapid installation
• Modular design
  Through self diagnosis, on-site replaceable modules provide fast availability and reduce maintenance requirements

usability

• Parallel battery module
  Provide higher availability through redundant batteries
• Dual Power Input
  Connecting the UPS to two independent power sources increases reliability.
• Scalable runtime
  Allow for quick increase of more running time when needed
• Compatible with generators
  When using the generator power supply, ensure a clean and uninterrupted power supply to protect the equipment
• Automatic internal bypass
  Provide common power to the connected load in the event of overload or malfunction of the UPS power supply.

Marketing Features

• network management
  Realize remote power management for UPS through the network.
• Manual maintenance of bypass
  No need to install external mechanical bypass, which can reduce installation costs.
• Dual Power Input
  Connecting the UPS to two independent power sources increases reliability.
• Scalable runtime
  Allow for quick increase of more running time when needed
• Hot swappable battery
  Ensure a clean and uninterrupted power supply throughout the battery replacement process to protect the equipment
• Input power factor correction
  By using a small generator and connecting wires, the installation cost is minimized

Sustainability

• EU CoC for UPS
  Ensures that UPSs sold in the EU are highly efficient

system protection

• Certified by security agencies
  The product has been tested and certified to ensure safe operation with the connected service provider equipment within the specified environment.
• Frequency and voltage adjustment
  Poor frequency and voltage conditions can be corrected without using batteries, providing higher availability.
• Cold start capability
  Provide temporary battery power supply when the mains power stops

Total Cost of Ownership

• Temperature compensation battery charging
  Adjust the charging voltage according to the actual battery temperature to extend the battery life
• Manual maintenance of bypass
  No need to install external mechanical bypass, which can reduce installation costs.
• Input power factor correction
  By using a small generator and connecting wires, the installation cost is minimized
• Intelligent battery management
  Obtain optimal battery performance, lifespan, and reliability through intelligent and precise charging technology.

output

• Output power capacity

  32.0 K wattage/40.0 kVA

• Maximum configurable power (watts)

  32.0 K wattage/40.0 kVA

• rated output voltage

  400V 3PH

• Output voltage annotation

  Can be configured for 3-phase rated output voltage of 380, 400, or 415 V

• full-load efficiency

  96.0 %

• Output voltage distortion

  Less than 5% at full load

• Output frequency (synchronized with the main frequency)

  47-53 Hz (50 Hz nominal value)

• Output frequency (asynchronous)

  50Hz +/- 0.1%， Rated 50Hz

• Other output voltages

  380, 415

• Peak load factor

  infinite

• topology

  Dual conversion online

• Waveform type

  sine wave

• Overload operation

  60 seconds at 125% and 30 seconds at 150%

• maximum output current

  64

• Output Connection
  (12) IEC 320 C19 (Backup Battery)
• bypass

  Built in maintenance bypass, built-in static bypass

input

• Rated input voltage

  400V 3PH

• input frequency

  40-70 Hz (automatic sensing)

• Input terminal type

  Hard Wire 5-wire (3PH + N + G)

• Working voltage range

  304 – 477 V

• full-load efficiency

  96.0 %

• Other input voltages

  380, 415

• Maximum input current

  55.0 A

• Input power factor under full load

  0.98

Battery and running time

• Type

  VRLA

• Typical charging time

  3 hours

• Optional battery

  APC-Smart-UPS-VT-40kVA-400V-PDU-

Communication and Management

• Interface ports (multiple)

  DB-9 RS-232 , SmartSlot

• control panel

  Multi functional LCD display status management console.

• Audible Alarm

  Sound and visual alarms: configurable delay

• emergency shutdown

  yes

Physical parameters

• tall

  1995 mm , 199.5 cm

• wide

  600 mm , 60.0 cm

• deep

  1075 mm , 107.5 cm

• net weight

  289.0 kg

• gross weight

  370.91 kg

• Shipping height

  2095 mm , 209.5 cm

• Shipping width

  756 mm , 75.6 cm

• Shipping depth

  1206 mm , 120.6 cm

• colour

  Black

environment

• operation temperature

  0 - 40 °C

• Relative humidity at work

  0 - 95 %

• Operating height

  0-99.9 meters

• storage temperature

  -50 - 40 °C

• Store relative humidity

  0 - 95 %

• Storage height

  0-15000 meters

• Noise that can be heard 1 meter away from the surface of the device

  67.0 dBA

• Online heat dissipation

  5459.0 BTU/hr

• Protection level

  IP 20

Compliance

• Management organization certification

  C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, VFI-SS-111

• Standard Warranty

  1-year repair or replacement service, start service