Sodium hypochlorite generator

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The sodium hypochlorite generator automatically dissolves salt particles into saturated saltwater, achieving a filtration accuracy of 5% for saturated saltwater; m， The removal of impurities from saltwater is beneficial for the lifespan of the electrode.

Product Details

　　Introduction to Sodium Hypochlorite Generator

● System Process Overview

Automatically dissolve salt particles into saturated saline solution, with a filtration accuracy of 5 µ m for saturated saline solution. Impurities in the saline solution are filtered out, which is beneficial for the lifespan of the electrode; Dilute the filtered saturated saline solution with water to a 3.0% diluted saline solution for use in electrolysis. The generator host adopts high-frequency constant current and stable voltage electronic switching power supply technology as the power source of the generator, and uses pure titanium electrodes with special material surface coating protection as the electrolytic electrodes of the generator. The tanks and components at all levels are made of food grade PE and CPVC materials, which can conveniently, safely, and stably produce high-quality and pure food grade sodium hypochlorite disinfectant solution.

●Performance characteristics of sodium hypochlorite generator

①Automatic salt dissolving tankAdd solid salt in a certain ratio, wait for the initial salt dissolution program to end (automatically end), and then add solid salt again, in a mixed state of salt and water, which can keep undissolved salt in the tank, in a saturated wet salt state, and keep the salt level between the high and low positions;

②Dissolved salt filterFilter out particulate impurities in saturated salt water after industrial salt dissolution, ensuring that impurities do not enter the sodium hypochlorite generator system, ensuring the purity of the sodium hypochlorite solution, and preventing any contamination of drinking water.

③Saturated salt tank after filtrationThe control system reads the real-time status of the liquid level switch in the saturated clean salt water tank. When the liquid level is below the replenishment level, the system automatically starts the salt dissolution pump and switches the corresponding electric valve to filter and replenish water until the high-level liquid level is closed, the clean salt tank is full, and the filtration process is automatically started and stopped.

④Automatic dilute salt proportioning device, dilute salt tankThe automatic dilute salt water proportioner adopts high low ratio control, which is automatically started/stopped by the control system based on the liquid level of the dilute salt tank and the chain of the dissolved salt tank. No manual operation is required. When the liquid level of the dilute salt tank is lower than the replenishment level, the system automatically opens the proportioning electric valve to carry out dilute salt proportioning until the tank is full; It is necessary to ensure that the tap water pressure is ≥ 0.25MPa, otherwise the dilute salt ratio cannot be carried out normally;

⑤Dilute salt solution metering and conveying pumpThis system uses a dilute salt water metering pump to quantitatively deliver dilute salt water to the electrolytic cell. When the liquid level of the dilute salt tank drops below the low control point, it indicates that the dilute salt tank is short of salt. The system will automatically stop the operation of the metering pump and wait for the state to recover before continuing to operate automatically;