Sodium meter channel solenoid valve

Z689=132=008 typeSodium meter channel solenoid valve

Z-689=132=008 type 9245Sodium meter channel solenoid valveIt is a product produced by the German manufacturer Burkert and is compatible with the 9245 sodium meter.

35600905040 O-ring

Common spare parts
9245-9240 Internal Communication Protocol Module 09200=A=5510
9245-9240 potential measurement module 09240=A=1500
Reference electrode 09240=C=0310 for 9245-9240 sodium ion analyzer
9245-9240 Sodium Ion Analyzer Glass Electrode 09240=C=0320
DIPA bottle, equipped with a porous water permeable module 09240=A=0510
Electrolyte for KCl 3M reference electrode, 500 ml 36314000500
PTFE pipeline ø 0.8X1.6mm (per meter) 15106508699
Tygon pipeline ø 1.6X3.2mm (per meter) 1513999002
PTFE pipeline ø 2X6mm (per meter) 15106508699
PolyEthylene pipeline ø 4X6mm (per meter) 15157500006
Channel solenoid valve, (0.2-6 bars) 689=132=008
Measurement solenoid valve for overflow container, 3/2 ways 689=132=024
Polytetrafluoroethylene coated magnetic stirring rod 26=004=013
Quick configuration of Ø 8mm O.D. pipeline 578=602=703
Quick configuration of Ø 6mm O.D. pipeline 578=601=703
Quick configuration plug (red) 518=401=501
9245 Sodium Meter Insertion Filter 595=000=002
9245 electric valve connector (IP65) 09240=A=9170
Sodium meter gas pump 695=004=006
Electrode cable AS7 09240=A=0320
Rinse pump 695=004=004
9245 Sodium Meter CPU Board with Display Screen 09200=A=1045
User Connection/Interface Motherboard 09200=A=5010 09200=A=5012

Testing steps for 9210 silicon meter photometer
-Enter the menu MAIN/MAINTENANCE/THE PUMPS/DAIN ON and drain the water from the measuring tank
-Enter the menu MAIN/MAINTENANCE/VALVE/VALVE 7 on to fill the measuring tank with water, close valve 7VALVE 7 off
-Open solenoid valve 1 VALVE 1 ON. Wait until the overflow cup is filled with water
-Enter the photometric detection menu Main/MAINTENANCE/HOTOMETER TEST
-When entering this menu, the sample water valve automatically opens and the sample water enters the measuring tank
-After the water in the overflow cup enters the measuring tank, press MES: At this time, the voltage value should be stable at 3500+/-20 mV
-If the voltage value is stable at this time but not 3500+/-20 mV
-Click BLACK: Its value should be 0.008+/-0.002
-Press REF: The instrument will automatically adjust the LED voltage and provide a reference voltage of 3500 mV. At this time, the LED voltage should be between 3500 and 7000
-If the LED voltage is not between 3500 and 7000 We need to clean the measuring tank.
-If the voltage value is unstable, the measuring slot should also be cleaned.
-If the voltage value stabilizes at 3500+/-20mV at this time
-Enter the menu MAIN/MAINTENANCE/THE PUMPS/PUMP 1 on and add 5 drops of R1.
-Return to the photometric detection menu Main/MAINTENANCE/HOTOMETER TEST
-Press MES and wait for 2-3 minutes.
-If the voltage value is unstable, it indicates that sodium molybdate has reacted with some impurities in the measuring tank. Therefore, the measuring tank should also be cleaned.
Please refer to the above steps for operation. If you have any questions, please consult the Ultra Pure Technical Service Department