Spee Ultra Portable Motion Viscometer from the United States

Spee Ultra Portable Motion Viscometer from the United States-MiniVisc 3000

1Spee Ultra Portable Motion Viscometer from the United StatesProduct Introduction

By monitoring the key physical characteristic of oil viscosity, equipment can avoid periodic shutdowns.Spee Ultra Portable Motion Viscometer from the United States-MiniVisc 3000Users can easily detect viscosity changes caused by oil aging, external pollution, or mixed oil pollution. Its split cell allows users to accurately analyze the kinematic viscosity of oil on site, without the need for solvents, resulting in less waste and being more environmentally friendly.

IISpee Ultra Portable Motion Viscometer from the United Statesworking principle

1. After the two panels of the open and closed loading cell are closed, a "capillary tube" is formed;
2During the measurement process, the oil remains vertically along the "capillary tube";
3The flow rate of oil is related to its viscosity and gravity;
4The viscosity of the oil is directly proportional to the flow rate of the oil;
5The panel is equipped with a high-precision infrared sensor (for measuring oil flow rate).

IIISpee Ultra Portable Motion Viscometer from the United StatesProduct Features

1. Direct motion viscosity detection;
2. Adopting the open closed capillary sample cell technology;
3. Built in high-resolution touch screen, battery, and microprocessor;
4. Both transparent and opaque oils can be detected;
5. No solvent required, easy to clean.
4、 New design

The kinematic viscosity of the tested oil sample @ 40 ℃=A * (t1- t0)+B
*A and B are the calibration coefficients for the working curve of the viscometer

5、 Main technical parameters

（1） Using parameters

1. Injection volume: 60 μ L (approximately 1-2 drops);
2Solvent/reagent: No need;
3Working temperature: 0-40 ℃;
4Working humidity: 10-80%, no condensation;
5Working altitude: ≤ 5000 meters.

（2） Product application:

1. Application scope: Mineral or synthetic lubricants, coolant, ethylene glycol, and Newtonian fluid output results within the measurement range, including kinematic viscosity (cSt, at 40 ° C)；
2Standards used: ASTM D7279, D445 (revised);
3Measurement range: 10cSt to 350cSt (cSt, at 40 ° C);
4Accuracy: ≤ 3% of measured value (after calibration);
5Repetition accuracy: ≤ 3% of measured values (typical);
6Temperature control accuracy: 40°C±0.1°C；
7Calibration: No need.

(3)mechanical parameters

1. Dimensions: 152mm (height) x 127mm (width) x 203mm (length);
2Weight: Approximately 1.8 kilograms;
3Outer packaging dimensions: 7.9cm (height) x 6.3cm (width) x 5.5cm (length).

（4） User interface parameters

1. Display: Color touch screen display;
2Data transfer: USB (used during software updates);
3Data input: touch screen;
4System languages: Chinese and English.

(V)Power parameters

1. Battery: The power supply is equipped with a built-in rechargeable lithium-ion battery;
2Power: AC 240V, 500Hz, 10W;
3Typical working hours: 6-8 hours;
4Charging time approximately: 2.5 hours;

（6） Consumables

1PV1012: 60 μ L disposable straw and soft cleaning paper, 100 sets/pack;
2P-11052: 60 μ L disposable straws, 500 pieces/pack;
3PV1011: Disposable soft cleaning paper, 500 sheets/pack;
4PV1019: Viscosity Verification Standard Oil.