Splitting funnel oscillator (vertical oscillator)

Product features: 1. Adopting high-power DC motor, microcomputer speed control system, stable oscillation speed, clear and intuitive LED digital display

Product Features:

1. Adopting high-power DC motor, microcomputer speed control system, stable oscillation speed, and clear and intuitive LED digital display.

2. The oscillation angle can be freely adjusted within the range of 0-15 ° according to user requirements.

3. Can simultaneously clamp different capacity separating funnels.

4. The instrument adopts a weighted base design, which runs smoothly and without displacement during high-speed oscillation.

5. The instrument comes standard with 6 specialized fixtures for separating funnels, and can be configured with 8 separating funnel fixtures according to user requirements (price separately)

Technical Specifications:

1. Oscillation speed: startup -300 times/minute

2. Oscillation amplitude: 35mm

3. Timing range: 1 minute to 99 hours or normally open

4. Work load: ≤ 10kg

5. Maximum bottling capacity: 50-3000mL separatory funnel x 6 pieces

6. Whole machine power: 200W

7. Power supply: 220V/50Hz

8. Adjustment range of oscillation angle: 0-15 °

Usage:

Before use, place the instrument on a sturdy workbench and keep it stable. The usage environment should be clean, dry, and well ventilated.

Firstly, adjust the height of the fixture according to the capacity of the separating funnel, and tighten the fixing screws. When in use, it should be placed symmetrically on both sides. Adjustment method for oscillation angle. Loosen the screws at both ends of the oscillation frame and move them simultaneously. After adjustment, be sure to tighten the screws.

Next, turn on the power and turn on the power switch. The power indicator light will turn on. Click the "OR" button to select the oscillation speed, then click the M and H buttons to select the timing time (M minutes, H hours). After setting, click the run button to start running. If you want to stop, click the stop button.

After use, turn off the power and set the oscillation speed to be maintained for future use.

Notes:

1. Before use, please test the machine with no load to see if it is working properly before clamping the separating funnel reagent bottle.

2. Before each use, check if all screws are tightened.

3. The clamping and separating funnel reagent bottle has a similar weight difference on both sides to avoid the phenomenon of being too heavy.

4. If the number of reagent bottles is insufficient, they can be placed symmetrically.

5. When oscillating, it is recommended that the solution in the bottle should not exceed one-third of the reagent bottle.

6. Medium speed use is beneficial for extending the service life.

7. This instrument uses a 220V, 50Hz power supply, so please use a three hole socket with a safety grounding