Three purpose constant temperature water tank (tank)

NegotiableUpdate on 10/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Three purpose constant temperature water tank (tank)

Product Details

Technical Specifications:

model	Temperature control range	Temperature control accuracy	temperature uniformity	heating power	working dimensions	power supply
HH-600	Room temperature -100 ℃	≤1℃	≤1℃	1500W	600×280×150	220

Product Features:
The outer shell of this product is made of high-quality cold-rolled steel plate and electrostatically sprayed. The inner liner, upper cover, and panel are all made of high-quality stainless steel plate, and the heating method is immersion electric heating tube heating. The temperature control adopts a high-precision temperature regulator, which can be adjusted freely within the range of use.

Product Features:

The outer shell of this product is made of cold-rolled steel plate and electrostatically sprayed. The inner liner, upper cover, and panel are all made of stainless steel plate, and the heating method is immersion electric heating tube heating. The temperature control adopts a high-precision temperature regulator, which can be adjusted freely within the range of use.

Usage and precautions:

1. The water tank should be placed flat on a fixed platform, and the power supply voltage must match the required voltage of the water tank. The power socket should use a three hole safety socket, and the grounding wire must be properly connected before use.

2. Before use, pour clean water into the tank. To shorten the heating time, hot water can also be injected.

3. Plug in the power, turn on the water tank switch, click the function key, adjust the ↑ or ↓ key, and select the desired working temperature.

Repair and maintenance:

The temperature control instrument is a key component for controlling temperature. It has been accurately calibrated before leaving the factory. If a control failure is found, in addition to checking the circuit, the control instrument should be inspected for any faults or sent back to the company for repair.

Exception handling:

serial number	phenomenon	Possible faults	Solution
1	Display normal but not heating up	The set value is lower than the actual measured temperature	View setting values
2	The heating light is on but not heating up	Heating tube broken or output relay damaged	View and exclude
3	Display LLL and flash	Measuring temperature below -0.5 ℃ or probe breakage	View and exclude
4	Display 99.9 and flash	The measured liquid temperature is higher than the upper limit of the instrument measurement	View and exclude
5	The displayed temperature is higher than the actual value	Probe water ingress	Check and dry the probe
6	Display normal temperature out of control	Control the short circuit or open circuit of the heating element's circuit	View and exclude
7	The temperature never rises	The advance setting is too large	Reduce lead time
8	The displayed data is dim and shaky	Low working voltage	Check the working voltage