Stainless steel elliptical gear flowmeter LC-B50.2/Z/LW

NegotiableUpdate on 12/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The stainless steel elliptical gear flowmeter LC-B50.2/Z/LW is a volumetric measuring instrument used for continuous or intermittent measurement and control of liquid flow in pipelines. It has many advantages such as a large range, high accuracy, low pressure loss, strong viscosity adaptability, ability to measure high-temperature and high viscosity liquids, convenient calibration, and installation suggestions. Suitable for flow measurement in departments such as petroleum, chemical, synthetic fiber, transportation, commerce, food, medicine and health. Equipped with pointer and dial accumulation device, it can directly display the liquid flow rate and instantaneous flow rate flowing through the pipeline on site. Adding a signaling device and an electronic display instrument in the counting mechanism can achieve the matching

Product Details

Stainless steel elliptical gear flowmeterLC-B50.2/Z/LW

Famous and of good quality.

1： Overview of elliptical gear flowmeter

It is a volumetric measuring instrument used for continuous or intermittent measurement and control of liquid flow in pipelines. It has many advantages such as a large range, high accuracy, low pressure loss, strong viscosity adaptability, ability to measure high-temperature and high viscosity liquids, convenient calibration, and installation suggestions. Suitable for flow measurement in departments such as petroleum, chemical, synthetic fiber, transportation, commerce, food, medicine and health.

Equipped with pointer and dial accumulation device, it can directly display the liquid flow rate and instantaneous flow rate flowing through the pipeline on site. Adding a signaling device and an electronic display instrument to the counting mechanism can achieve centralized control of cumulative, quantitative, and instantaneous flow remote transmission. Installing a radiator or elliptical wheel with insufficient teeth can measure high temperature and high viscosity liquids.
The flowmeter body can be made of different materials for different liquids (acid, alkali, salt, organic solution, etc.).

Stainless steel elliptical gear flowmeterLC-B50.2/Z/LW

2： Working principle of elliptical gear flowmeter

Composed of a flow transmitter and a counting mechanism. Installing a radiator between the transmitter and the counting mechanism constitutes a high-temperature flowmeter. The transmitter consists of a measuring chamber equipped with a pair of elliptical gear rotors and a sealed coupling, while the counting mechanism includes a reduction mechanism, an adjusting mechanism, a counter, and a transmitter. The measuring room is composed of a pair of elliptical gears and a cover plate to form a crescent shaped cavity as the unit of measurement for flow rate. The elliptical gear rotates by the pressure difference between the inlet and outlet of the flowmeter, continuously measuring the liquid through the crescent shaped cavity and delivering it to the outlet. The liquid flowing through each rotation is four times that of the crescent shaped cavity. The total number of rotations and the speed of rotation of the elliptical gear are transmitted to the counting mechanism or transmitter through a sealed coupling, which can determine the total amount and instantaneous flow rate of liquid passing through the pipeline.

IIIHefei elliptical gear flowmeter manufacturerFeatures:

1. High measurement accuracy: 0.2 and 0.5 levels;
2. Simple, sturdy, and reliable in operation;
3. Especially suitable for measuring media with high viscosity, and insensitive to changes in the viscosity of the measured liquid;
4. Easy to install. There is no need for straight pipe sections before and after the flowmeter, even if the flowmeter is close to valves, bends, reducers, or expanders, there is no need to install straight pipe sections.
5. Widely used for measuring various oil products and liquid media of cast iron *
6. Used for measuring high-pressure and low corrosive media
7. Widely used for measuring highly corrosive liquid media such as acids, bases, salts, and organic compounds
8. To prevent the gears of the flowmeter from getting stuck by impurities, a filter must be installed upstream of the flowmeter
9. Explosion proof grade: ExiaICT6

4、 Technical data:

1. Cast iron type, cast steel type, lightweight cast iron type

	LC-A cast iron type	LC-QA cast iron aluminum tooth profile	LC-E cast steel type
Nominal pressure MPa	1.6		2.5, 4.0, 6.4
Temperature range ℃	-20~+100
accuracy class	0.5% 0.2%
Flow range m3/h
Measured liquid viscosity mPa. s
Caliber (mm)	0.6-2	2-8	8-200
10		0.08-0.4	0.04-0.4
15		0.3-1.5	0.15-1.5
20	0.75-3	0.4-3	0.3-3
25	1.5-6	0.8-6	0.6-6
40	3-15	2-15	1.5-15
50	4.8-24	3-24	2.4-24
80	12-60	8-60	6-60
100	20-100	13-100	10-100

2. Cast iron high-temperature type, cast steel high-temperature typeElliptical gear flowmeter

	LC-TA cast iron high-temperature type		LC-TE cast steel high-temperature type
Nominal pressure MPa	1.6			6.4
Temperature range ℃	+100-+180
accuracy class	0.5 0.2
Flow range m3/h
	Viscosity of the tested liquid
Caliber (mm)	0.8-2	2-8		8-200
10		0.08-0.4		0.04
15	0.45-1.35	0.36-1.35		0.18-1.35
20	0.9-2.7	0.48-2.7		0.36-2.7
25	1.8-5.4	0.96-5.4		0.72-5.4
40	3.6-13.5	2.4-13.5		1.8-13.5
50	5.8-21.6	3.6-21.6		2.9-21.6
80	15-54	9.6-54		7.2-54
100	24-90	22-90		12-90

3. Cast iron high viscosity typeElliptical gear flowmeter

	LC-NA cast iron high viscosity type	LC-NE cast steel high viscosity type
Nominal pressure MPa	1.6		6.4
Temperature range ℃	-10-+80 +100-+180
accuracy class	0.5 0.2
Flow range m3/h
Measured liquid viscosity mPa. s
Caliber (mm)	200-2000
10	0.02-0.2
15	0.075-0.75
20	0.15-1.5
25	0.3-3
40	0.75-7.5
50	1.2-12
80	3-30
100	5-50