Stainless steel pressure gauge

NegotiableUpdate on 12/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Pressure gauge refers to an instrument that uses elastic elements as sensitive components to measure and indicate pressures higher than ambient pressure. It is widely used in almost all industrial processes and scientific research fields. It can be seen everywhere in fields such as thermal pipelines, oil and gas transmission, water and gas supply systems, vehicle maintenance and repair shops, etc. Especially in industrial process control and technical measurement processes, the elastic sensitive components of mechanical pressure gauges have high mechanical strength and convenient production characteristics, making them increasingly widely used.

Product Details

working principle

The pressure gauge displays pressure by the elastic deformation of sensitive components (Bourdon tube, bellows, bellows) inside the gauge, which is then transmitted to the pointer by the conversion mechanism of the movement inside the gauge, causing the pointer to rotate.

main structure

Overflow hole: In the event of an emergency situation where a Bourdon tube bursts,

The internal pressure will be released to the outside through the overflow hole to prevent the glass panel from bursting. Note: In order to maintain the normal performance of the overflow hole, a space of at least 10mm should be left behind the table, and the overflow hole cannot be modified or plugged.

Pointer: In addition to standard pointers, other pointers are also optional.

Glass panel: In addition to standard glass, other special materials such as reinforced glass and non reflective glass are also optional.

Performance classification: Ordinary type (standard), Steam ordinary type (M), Heat resistant type (H), Vibration resistant type (V), Steam vibration resistant type (MV), Heat resistant and Vibration resistant type (HV).

Treatment method: Oil/water prohibition treatment is used to remove residual water or oil in the liquid contact area during manufacturing.

Exterior: The color of the shell should be specially specified in addition to the standard color.

Throttle valve (optional): To reduce pulsating pressure, the throttle valve is installed at the pressure inlet.