Suchuan supplies differential pressure L-type bend tube flowmeter

NegotiableUpdate on 12/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The wholesale price of the differential pressure L-shaped bend tube flowmeter belongs to the differential pressure flow measurement system. It is an instrument that uses the principle of centrifugal force generated by fluid in circular motion to measure the flow rate of media in pipelines. It can be used to measure media such as gas, dry and wet gases (air, coke oven gas, blast furnace gas, etc.), steam, liquids, etc. Suchuan supplies differential pressure L-type bend tube flowmeter

Product Details

Suchuan supplies differential pressure L-type bend tube flowmeter

The differential pressure L-type bend tube flowmeter belongs to the differential pressure flow measurement system. It is an instrument that uses the principle of centrifugal force generated by fluid in circular motion to measure the flow rate of media in pipelines. It can be used to measure media such as gas, dry and wet gases (air, coke oven gas, blast furnace gas, etc.), steam, liquids, etc. The bent pipe flowmeter consists of sensors, flow integrators, differential pressure benders, and some pipeline valves. Sensors are divided into L-type sensors and S-type sensors. When temperature and pressure compensation are required for flow measurement, pressure transmitters and temperature transmitters should also be equipped.

Wholesale price of differential pressure L-type bend tube flowmeterTechnical parameters:

Pipe diameter range (mm)	DN15-2000 (for on-site modified bend tube sensors, there is no pipe diameter limit)
Flow velocity range (m/s)	Liquid 0.1-12 vapor or gas 5-160
accuracy	±1%
working environment	Converter: Temperature -10~45 ℃, humidity less than 85% (please specify in special circumstances) Sensor: Temperature -50~600 ℃, pressure 0~16MPa (please specify in special circumstances)
signal output	4-20mA　　RS-485　　RS-232
working power supply	AC220, 50Hz or DC12~24V
measuring medium	Liquids: water, oil, methanol, toluene, liquid ammonia, etc Gases: blast furnace gas, coke oven gas, mixed gas, hydrogen, oxygen, air, nitrogen, etc Steam: saturated steam, superheated steam

Suchuan supplies differential pressure L-type bend tube flowmeterCharacteristics:

There are no inserts or throttling components inside the sensor, and there is no pressure loss.
Suitable for measuring dirty gases and not easily clogged.
The sensor is suitable for a wide temperature and pressure range: -50~600 ℃, 0~30Mpa.
The straight pipe section has low requirements, with the first 5D and the second 2D.
Large caliber sensors can be retrofitted online using on-site 90 ° elbows.
Sensors can operate under harsh conditions such as high temperature, high pressure, dust, vibration, and humidity.
Expert algorithms for the full range range range, especially for measuring steam. With changes in temperature and pressure, superheated steam often transforms into saturated steam, forming a two-phase flow medium of steam and liquid. The algorithm compensates for the influence of gas-liquid two-phase flow medium on mass flow measurement, ensuring measurement accuracy.
You can query traffic data for the past 720 hours, 365 days, 36 months, and * year.