-
E-mail
jssc18@163.com
-
Phone
15261724159
-
Address
No. 8 Donglian Road, Dailou Industrial Concentration Zone, Jinhu County
Jiangsu Suchuan Instrument Co., Ltd
jssc18@163.com
15261724159
No. 8 Donglian Road, Dailou Industrial Concentration Zone, Jinhu County
The LDE fully intelligent electromagnetic flowmeter is a fully intelligent flowmeter developed using new advanced technologies both domestically and internationally. Compared with other old-fashioned analog or non intelligent electromagnetic flowmeters, it has taken a significant step forward in measurement accuracy, reliability, stability, functionality, and lifespan. It is an instrument and equipment for measuring highly corrosive liquids.
Suchuan supplies fully intelligent electromagnetic flow metersFeatures:
1. Measurement is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity;
2. Measure the flow components inside the tube, with no pressure loss and low requirements for straight pipe sections;
3. Series nominal diameter DN15~DN3000. There are multiple options for sensor lining and electrode materials;
4. The converter adopts a novel excitation method, with low power consumption, stable zero point, and high accuracy. The flow range can reach 1500:1;
5. The converter can be integrated or separated from the sensor;
6. The converter adopts a 16 bit high-performance microprocessor, 2x16 LCD display, convenient parameter setting, and reliable programming;
7. The flowmeter is a bidirectional measurement system equipped with three integrators: forward total, reverse total, and differential total; Can display. Zhuang, reverse flow, and have multiple outputs: electric
Flow, pulse, digital communication HART;
8. The converter adopts surface mount technology (SMT) and has self checking and self diagnostic functions;
Wholesale price of LDE fully intelligent electromagnetic flowmeterCorrect selection:
The selection of instruments is a very important task in instrument applications. According to relevant data, 2/3 of instrument failures in practical applications are caused by incorrect selection and installation of instruments, and special attention should be paid.
·Collect data
① Name of the tested fluid;
② High traffic, low traffic;
③ High work pressure;
④ 高温度、低温度。
·The tested fluid must have a certain degree of conductivity
·Both high and low traffic must comply with the numbers in the table below. (Extended process range 0.1-15m/s)
Suchuan supplies fully intelligent electromagnetic flow metersSelection spectrum:
model |
caliber |
|||||
SCLDE |
15~2600 |
|||||
code name |
electrode material |
|||||
K1 |
316L |
|||||
K2 |
HB |
|||||
K3 |
HC |
|||||
K4 |
Titanium |
|||||
K5 |
Tantalum |
|||||
K6 |
Platinum alloy |
|||||
K7 |
Stainless steel coated with tungsten carbide |
|||||
code name |
Lining material |
|||||
C1 |
Polytetrafluoroethylene (F4) |
|||||
C2 |
Perfluoroethylene propylene (F46) |
|||||
C3 |
Polyfluoroethylene (FS) |
|||||
C4 |
Polyvinyl rubber |
|||||
C5 |
Polyurethane rubber |
|||||
code name |
function |
|||||
E1 |
Level 0.3 |
|||||
E2 |
Level 0.5 |
|||||
E3 |
Level 1 |
|||||
F1 |
4-20Madc, Load ≤ 750 Ω |
|||||
F2 |
0-3kHz, 5V active, variable pulse width, output effective frequency |
|||||
F3 |
RS485 interface |
|||||
T1 |
Room temperature type |
|||||
T2 |
high-temperature type |
|||||
T3 |
Ultra high temperature type |
|||||
P1 |
1.0MPa |
|||||
P2 |
1.6MPa |
|||||
P3 |
4.0MPa |
|||||
P4 |
16MPa |
|||||
D1 |
220VAC±10% |
|||||
D2 |
24VDC±10% |
|||||
J1 |
Integrated structure |
|||||
J2 |
Split type structure |
|||||
J3 |
Explosion proof integrated structure |
|||||