Swing NC feeding machine

NegotiableUpdate on 03/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Using video of offset NC servo feeding machine: Offset NC servo feeding machine disc stamping: ● Offset NC feeding machine technical parameters: model large material width [mm] material thickness [mm] offset [mm] feeding speed [m/min] material line height [mm] PNCF-2002000

Product Details

Video of using the skewed NC servo feeder:

Swing NC servo feeding machine disc stamping:

●Technical parameters of skewed NC feeder:

Model number	Large material width [mm]	Material thickness [mm]	Offset [mm]	Feeding speed [m/min]	Material line height [mm]
PNCF-200	200	0.2 ～ 3.2	左右100	16	80 ～ 250
PNCF-300	300	0.2 ～ 3.2	左右150	16	80 ～ 250
PNCF-400	400	0.2 ～ 3.2	左右200	16	80 ～ 250
PNCF-500	500	0.2 ～ 3.2	左右250	16	80 ～ 250

Application case of skewed NC servo feeder:

●Product Features:

The skewed NC feeder adopts a dual axis alternating feeding method, which realizes the movement of materials in a two-dimensional plane, enabling the circular cutting position of the disc to achieve circular mutual cutting, achieving effective and fast disc cutting processing, and greatly improving the utilization rate of materials.
1. This machine can perform multiple displacements based on the diameter of the wafer during cutting, ensuring circular cutting and maximizing material utilization. If the size of the wafer during cutting is not the same, the arrangement angle can be automatically calculated to ensure material savings.
2. Adopting a Mitsubishi PLC control system to control two sets of Yaskawa servo motors, one servo motor system is connected to the feeding drum with synchronous pulleys to achieve precise control of the feeding drum; Another set of servo motor system is connected to the Taiwan Shangyin Precision Roller Screw with synchronous pulleys to achieve precise left and right movement. During the continuous stamping process, the small distance between edges can be set within 0.5mm, and the feeding error can be controlled within ± 0.08mm to meet increasingly high processing requirements.
3. Simplified operation and high degree of automation. Simply input the width of the material, the diameter of the required cutting circle, and the feeding step distance on the touch screen, and the control system will automatically calculate the distance of movement and feeding without adjusting any mechanical mechanism, truly achieving fully automated operation and use.

●Standard attachments:

1. Electrical components: Adopting Mitsubishi programmable controller imported from Japan, Yaskawa servo motor, Yaskawa servo drive
2. Ball screw: HIWIN (Shangyin) imported screw from Taiwan 3. Linear guide: HIWIN (Shangyin) imported guide from Taiwan
4. Touch screen: Mitsubishi 7-inch large touch screen from Japan, 5. Pneumatic components: Yadeke
6. Key low-voltage electrical components: Schneider 7, photoelectric sensor: OMRON
8. Bearings and Couplings: MISUMI from Japan
9. Feeding roller: made of bearing copper, quenched by heat treatment, hollow, surface plated with hard chromium, hardness above 60 degrees, lightweight, wear-resistant, not easy to scratch, can ensure the surface plating and feeding accuracy of the material;
10. Transmission gear: precision grinding gear
11. Mechanical processing: The main components are processed using imported machining centers, and the feeding machine structure is integrally formed.

●Typical applications:

　　Automated stamping and feeding operations for monitor stands, DVD stands, fax machine hardware accessories, computer and electrical hardware accessories, automotive hardware accessories, water heater hardware accessories, shelf punching, wiper hardware accessories, lighting hardware accessories, etc.

Note: All machining, inspection, and assembly are completed by us to ensure the quality of the skewed NC feeder.