Thin plate three in one feeding machine

NegotiableUpdate on 03/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Thin plate three in one feeding machine

Product Details

Video of using the thin plate three in one feeding machine:

Thin plate three in one feeding machine with punching machine for use:

●Technical parameters of thin plate three in one feeding machine:

Model number	NCSF5-400A	NCSF5-500A	NCSF5-600A	NCSF5-800A	NCSF5-1000A	NCSF5-1300A
Material width [mm]	50 ～ 400	50 ～ 500	50 ～ 600	50 ～ 800	50 ～ 1000	50 ～ 1300
Material thickness [mm]	0.3 ～ 3.2
大料重[kg]	3000(5000)				5000(7000)
Roll inner diameter [mm]	￠508
Outer diameter of coil material [mm]	￠1200			￠1400
High speed [m/min]	16				22
Standard feeding accuracy [mm]	±0.15
Correction roller [mm]	￠ 48 × 11 pieces (top 6/bottom 5)				￠ 48 × 7 pieces (top 4/bottom 3)
Feeding roller (set)	1
Standard feeding height [mm]	1150±100			1200±100
power supply voltage	220VAC 60HZ/AC380v 50HZ
Air pressure [kg/cm2]	5
Expansion method of material rack	oil pressure
Servo motor [kw]	AC 3.0			AC 4.4	AC 5.5
Rack motor [kw]	1.5(2.2)			2.2(3.7)

Matching display:

●Structure and core components of the thin plate three in one feeding machine:

●Correction Ability Table:

model		Material thickness [mm]
model		0.3	1.3	1.6	2.0	2.3	2.5	2.8	3.2
Feed width [mm]	NCSF5-400A	400				300	230	150	110
	NCSF5-500A	500		400	360	300	230	150	110
	NCSF5-600A	600		470	360	300	230	150	110
	NCSF5-800A	800		480	360	370	320	250	220
	NCSF5-1000A	1000		430	350	330	290	250	200
	NCSF5-1300A	1300		430	350	330	290	250	200

●Product Features:

1. The standard three in one feeding machine adopts a downward feeding method and is suitable for stamping, unwinding, and leveling feeding of medium and thin plate coils with a thickness of 0.3mm to 3.2mm and a width of 50mm to 1300mm.
2. The material pressing arm adopts pneumatic material pressing to prevent loose coil material, and cooperates with the feeding pressure plate to flatten the material head, allowing the material to smoothly enter the machine body.
3. 11 leveling rollers are used, and high-strength rolling bearing steel GCr15 is used. After high-frequency quenching and tempering treatment, the surface is plated with hard chromium, and the hardness can reach HRC60-62 degrees, with a dimensional accuracy of 0.01mm. The steel properties of the leveling rollers and the surface smoothness of the leveling rollers are strictly guaranteed to ensure the surface performance of the material being leveled during the leveling process.
4. The material on the shelf is controlled by the control photoelectric below. The leveling feeding head can level the material while feeding the pre-set feeding length into the punch mold. Through the electrical signal given by the punch, the material action is instantly relaxed, the downward pressure is strong, and the material is accurately guided.
5. The operation of each auxiliary device is powered by air or electricity, with simple operation, easy maintenance, and low failure rate after debugging.
6. The feeding trolley device can be selected to save feeding time, improve work efficiency, save manpower, and achieve one person operation.

●Description of various accessories:

1. Servo motor: Yaskawa Motor from Japan 2. Rack motor: Shengbang Motor from Taiwan 3. Optical switch: Omron from Japan
4. Arm motor: Yamato motor 5, frequency converter: Taiwan Delta 6, cylinder: Japan CKD/WPI
7. Pneumatic solenoid valve: Japan SMC/Taiwan Yadeke 8, pneumatic components: Japan SMC/Taiwan Yadeke
9. Touch screen: Taiwan Haitech 10, PLC programmable controller: Japan Mitsubishi 11, circuit breaker: Germany Schneider
12. Communication contactor: Schneider 13 from Germany, thermal relay: Schneider 14 from Germany, control button: Izumi from Japan
15. Relay: Izumi 16 from Japan, Hydraulic components: Taiwan (Zhongli)
17. The straightening roller and feeding roller are made of high-quality bearing steel with chrome Gcr15 quenching and high-frequency quenching, precision grinding and hard chrome plating at 60 ℃ -62 ℃
18. Bearings: using German FAG, Japanese IKO, NSK, etc;
19. Copper lining: using self-lubricating bearings or copper lining;
20. Gear: Made of 20CrMnTi, treated with nitriding, and precision ground to meet the national standard level six;
21. The frame of the machine is welded and tempered to relieve stress, and then bored by a boring machine to ensure the concentricity of the spindle;

Note: All machining, inspection, and assembly are completed by us to ensure the quality of the three in one feeding machine.