Product Categories

Classified by product series

Suzhou Tuobo Machinery Equipment Co., Ltd

E-mail
tophung.sz@163.com
Phone
13584812189
Address
No. 8 Liuzhuang Road, Mudu Jinqiao Development Zone, Wuzhong District, Suzhou City, Jiangsu Province, China

Contact Now

TH-8100S servo computerized universal material testing machine

NegotiableUpdate on 10/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The TH-8100S servo computerized universal material testing machine is widely used in industries such as metal materials and products, automotive components, fasteners, composite materials, power tools, webbing, building materials, etc. It is also used in higher education institutions, research laboratories, commercial inspection and arbitration, technical supervision and other departments

Product Details

The TH-8100S servo computerized universal material testing machine adopts fully digital force, displacement, and speed three loop control during the testing process. It uses a Tai Wan Delta AC servo motor and control drive system, combined with an Italian Haitec gearbox and a Taiwanese TBI ball screw transmission, to achieve transmission efficiency and signal-to-noise ratio effect.

This testing machine is mainly used for testing mechanical tests such as tensile, compressive, flexural, shear, tear, and welding strength of metal materials, automotive components, composite materials, and other samples. At the same time, testing and data processing can be conducted according to various standards provided by GB, ISO, JIS, ASTM, DIN, and users.

Technical Specifications

1. Test force selection: 50kN/100kN;

2. Accuracy level: better than level 0.5;

3. Load measurement range: 0.2% -100% FS;

4. Allowable error limit for test force indication: within ± 0.5% of the indication;

5. Resolution of test force indication: 1/± 500000 of the maximum test force;

6. Deformation measurement range: 0.2% -100% FS;

7. Limit of deformation indication error: within ± 0.50% of the indication;

8. Deformation resolution: 0.0001mm

9. Limit of displacement indication error: within ± 0.5% of the indication;

10. Displacement resolution: 0.0005mm

11. Force control rate adjustment range: 0.01-10% FS/S

12. Force control rate control accuracy: within ± 1% of the set value

13. Deformation rate adjustment range: 0.02-5% FS/S;

14. Deformation rate control accuracy: within ± 0.5% of the set value

15. Displacement speed adjustment range: 0.001-500mm/min

16. Displacement rate control accuracy: within ± 1.0% of the set value when the rate is less than 5mm/min; When the speed is ≥ 5mm/min, within ± 0.5% of the set value

17. Constant force, constant deformation, constant displacement control range: 0.5% -100% FS

18. Constant force, constant deformation, and constant displacement control accuracy: within ± 0.1% of the set value when the set value is ≥ 10% FS; When the set value is less than 10% FS, within ± 1% of the set value

19. Effective test width: 500mm

20. Effective stretching space distance: 1100mm

21. Overall dimensions of the host (length x width x height): 950 x 650 x 2000 (mm)

22. Power supply: 50kN: single-phase 220V 50Hz 1.5kW; //100kN: single-phase 220V 50Hz 2kW

23. Machine weight: 50kN: about 650kg;//100kN: about 850kg

Features

1. Chip integration technology, professionally designed data acquisition and amplification system, has the advantages of high integration, stability and reliability, and easy use. The control software can automatically obtain detection data such as tensile strength, yield strength, compressive strength, fracture strength, peel strength, elastic modulus, elongation, etc. Open formula editing can automatically calculate the force, stress, displacement, deformation and other data results of any specified point during the test process. The control and data processing of the experimental process comply with the requirements of the corresponding national standards for metallic and non-metallic materials.

2. Control methods: Optional control methods include constant speed, positioning displacement, constant load, constant load rate, constant stress, constant stress rate, constant strain, and constant strain rate;

3. Automatic zeroing: After the experiment begins, the measurement system automatically resets to zero;

4. Automatic shifting: automatically switches to the appropriate range according to the load size to ensure the accuracy of measurement data;

5. Automatic saving: Test data and conditions are automatically saved to prevent data loss caused by forgetting to save them;

6. Batch test: For samples with the same parameters, a batch of tests can be completed sequentially after one setting;

7. Display mode: Data and curves are dynamically displayed during the experimental process;

8. Curve traversal: After the experiment is completed, the curve can be reanalyzed by using the mouse to find the data corresponding to each point on the experimental curve;

9. Curve selection: stress-strain, force displacement, force time, displacement time and other curves can be selected for display and printing;

10. Unit switching: Force units: (g, kg, N, lb), stress units: (kg/mm2, N/mm2, Mpa, lbf/in2)

Displacement units: (m, mm, in)

11. Test report: The test report can be programmed and printed in the format required by the user, and can be exported as WORD, EXCEL, or PDF files;

12. Test data: Powerful result data query function, allowing historical test records to be queried at any time through the database;

13. Security protection: When the maximum load exceeds 2-10%, automatic security protection is implemented;

14. It can automatically detect and calculate the mechanical performance indicators of the sample, and can also manually intervene in the analysis process. According to the requirements of relevant standards, the automatic analysis results can be corrected to improve the accuracy of the data;

Standard Accessories

1. Load sensor: MKCELLS high-precision load cell from the United States, 50kN/100kN per unit;

2. Displacement sensing system: one set of high-precision photoelectric encoder for sensing full range displacement encoder;

3. Data acquisition card: TH2000 64 bit closed-loop measurement control motherboard;

4. Test software: One set of TM2101 English/Chinese Simplified/Traditional Three in One Measurement and Control System;

5. Power system: One set of Taiwan AC servo motor and control drive system;

6. Transmission system: One set of Italian Haitec gearbox and Taiwan TBI ball screw;

7. Testing fixture: one set of tensile testing fixtures;