TH-8203S servo computerized desktop tensile testing machine

The TH-8203S servo computerized desktop tensile testing machine adopts fully digital force, displacement, and speed three loop control during the testing process. It uses Taiwanese AC servo motors and control drive systems, combined with Italian Haitec gearbox and Taiwanese TBI ball screw transmission, to achieve transmission efficiency and signal-to-noise ratio effect.

This testing machine is mainly used for testing mechanical tests such as tensile, compressive, anti bending, shear, peeling, and tearing of electronic materials, hardware components, solar photovoltaic modules, and other samples. At the same time, testing and data processing can be conducted according to various standards provided by GB, ISO, JIS, ASTM, DIN, and users.

Execution standard:

GB/T 528, GB/T 13022, GB/T 2970, ASTM D5458, ISO 5810 and other testing standards

1. Advanced chip integration technology, professionally designed data acquisition and amplification system, with advantages such as high integration, stability and reliability, and easy use. The control software can automatically obtain detection data such as tensile strength, yield strength, compressive strength, fracture strength, peel strength, elastic modulus, elongation, etc. Open formula editing can automatically calculate the force, stress, displacement, deformation and other data results of any specified point during the test process. The control and data processing of the experimental process comply with the requirements of the corresponding national standards for metallic and non-metallic materials.

2. Control methods: Optional control methods include constant speed, positioning displacement, constant load, constant load rate, constant stress, constant stress rate, constant strain, and constant strain rate;

3. Automatic zeroing: After the experiment begins, the measurement system automatically resets to zero;

4. Automatic shifting: automatically switches to the appropriate range according to the load size to ensure the accuracy of measurement data;

5. Automatic saving: Test data and conditions are automatically saved to prevent data loss caused by forgetting to save them;

6. Batch test: For samples with the same parameters, a batch of tests can be completed sequentially after one setting;

7. Display mode: Data and curves are dynamically displayed during the experimental process;

8. Curve traversal: After the experiment is completed, the curve can be reanalyzed by using the mouse to find the data corresponding to each point on the experimental curve;

9. Curve selection: stress-strain, force displacement, force time, displacement time and other curves can be selected for display and printing;

10. Unit switching: Force units: (g, kg, N, lb), stress units: (kg/mm2, N/mm2, Mpa, lbf/in2), displacement units: (m, mm, in)

11. Test report: The test report can be programmed and printed in the format required by the user, and can be exported as WORD, EXCEL, or PDF files;

12. Test data: Powerful result data query function, allowing historical test records to be queried at any time through the database;

13. Security protection: When the maximum load exceeds 2-10%, automatic security protection is implemented;

14. It can automatically detect and calculate the mechanical performance indicators of the sample, and can also manually intervene in the analysis process. According to the requirements of relevant standards, the automatic analysis results can be corrected to improve the accuracy of the data;

1. Load sensor: MKCELLS high-precision load cell from the United States, 2000N each;

2. Displacement sensing system: One set of high-precision photoelectric encoder for sensing full range displacement encoder;

3. Data acquisition card: one TH2000 64 bit closed-loop measurement control motherboard;

4. Testing software: One set of TOP-TEST English/Simplified Chinese/Traditional Chinese three in one measurement and control system;

5. Power system: One set of Taiwan AC servo motor and control drive system;

6. Transmission system: One set of Italian Haitec gearbox and Taiwan TBI ball screw;

7. Testing fixtures: one set of standard tensile testing fixtures;