TVS-201V Low Frequency Vibration Speed Sensor

TVS-201V Low Frequency Vibration Speed SensorTVS-201V Low Frequency Vibration Speed Sensor

It is an inertial sensor produced by Zhengzhou Hangke Instrument Co., Ltd. It uses the principle of magneto electric induction to convert vibration signals into voltage signals, which are proportional to the vibration velocity value.It can be used to measure the vibration of bearing seats, casings, or structures (relative to inertial space vibration). It is directly installed outside the machine, making it extremely convenient to use and maintain.Technical parameters: Sensitivity: 10-20-30-40-50mV/mm/s ± 5%; Test conditions: (measured at a temperature of 20 ℃± 5 ℃, 80Hz, and a speed of 10mm/s) ■ Amplitude limit: ≤ 2000 μ m (peak to peak); Frequency response: (10~1000) Hz; ■ Acceleration: 10g; ■ Measurement direction: vertical or horizontal; (Universal type) ■ Installation method: Fix the sensor with an M10 × 1 or M10X1.5 screw in the center hole at the bottom; ■ Output wiring method: SZ-6 aviation connector; SZ-6c type direct outgoing line; ■ Environmental conditions: dustproof and moisture-proof ■ Operating temperature: (-30~120) ℃; Relative humidity: ≤ 95% (non condensing); ■ Dimensions: SZ-6: Φ 31 × 78 (mm3);

CD-1/CD-2/CD-4/CD-4A/CD-6/CD-6A/CD-7-C/CD-7-S/CD-8/Wagai vibration sensor

CD-21-2-C/CD-21-2-S/CD-21-T/CD-21C/S/BCD-21A/CD721/WINDVibration velocity sensor