Used JUKI-KE-2050

Equipment Name: JUKI KE 2050M SMT Machine, 2050L JUKI SMT Machine, Used JUKI KE 2050M

Equipment Introduction:

JUKI 2050 is an upgraded version of JUKI 750, equipped with 4 standard mounting heads, suitable for high-precision mounting of small components, high rigidity frame, integrated casting, and increased rigidity by 40%. It uses XY independent drive mounting heads, and JUKI adopts newly developed multi angle and vertical lighting, which can identify reference points due to PCB deformation and other conditions (especially flexible circuit boards). Therefore, it is widely used in FPC soft board mounting processing. With the BAD MARK function, it is easy to skip bad boards and can also be retrofitted to produce 1.2-meter LED light boards Theoretical hourly rate of 13200 points. The actual production capacity speed is around 10000 points per hour The JUKI KE series products have received high praise from customers for many years. As a single module with a modular concept, flexible surface mount machine production lines can be formed according to production capacity.

Used JUKI 2050 Parameters

1. 13200CPH: Chip (actual production capacity and efficiency)
Multiple laser sticker heads x 1 set (4 suction nozzles) 0603 chip~20mm square component
2. Substrate size: 330 * 250mm
3. Component height that can be attached: 6-12mm (OPTION: 20mm)
4. Actual mounting speed: The chip component is 13200CPH
5. Component mounting accuracy: laser recognition ± 0.05mm
6. Weight: Approximately 1400KG
7. Power supply three-phase AC 200-415V
8. Power: 3kVA
9. Use air pressure: 0.49 ± 0.05Mpa
10. Air consumption (standard state): 230L/min
11. Size: 1400 × 1393 × 1455mm