V-850S three-axis rail double exchange worktable vertical machining center

Jiasu's dual exchange platform achieves non-stop clamping of workpieces, doubling efficiency

1. Bed frame

Made by advanced resin sand casting and box structure design, the material is tough after aging treatment to eliminate internal stress. Combined with box structure design and high rigidity body structure, the machining center has sufficient rigidity and strength, demonstrating the characteristics of cutting resistance and high precision of the whole machine.

2. Transmission shaft
The X/Y/Z axis adopts a linear track sliding rail design. The column, saddle, head, and base are made of advanced resin sand casting and box structure design and manufacturing. The configuration of ribs is strengthened through computer analysis to improve rigidity and stability.

3. Screw rod
The three-axis adopts high-precision double nut preloaded precision ball screws, combined with locking and pulling design of the support seats at both ends, which can eliminate transmission backlash and pre compensate for errors caused by temperature rise, ensuring positioning accuracy.

4. Spindle motor
By using a high-speed motor, the machining center has excellent performance in high-speed, low-speed, light and heavy cutting (with a power of 7.5/11 KW).

5. Spindle head
Adopting a high-precision and high rigidity spindle head, it can withstand heavy cutting and long-term heavy cutting of radial and axial loads, and can maintain high precision in machining over time.

6. Knife magazine (optional)
Adopting a conical/disc-shaped tool magazine, it provides fast, smooth, and reliable tool exchange actions, controlled by PLC software for fast and rapid tool exchange actions, reducing non cutting time.

7. Electrical box
The electrical box is equipped with a heat exchanger to ensure system stability, and the external wiring part has protective coils that can withstand heat and oil and water.

8. Lubrication system
Adopting an automatic depressurization lubrication system for centralized oil supply, and an advanced depressurization intermittent oil supply system, timely and appropriate oil supply is provided to each lubrication point in a timed, quantitative, constant pressure, and individual manner, ensuring that each lubrication position receives lubricating oil at the right time and ensuring worry free operation of the machining center for a long time.

9. Fully dense sheet metal

Under the strong requirements of environmental protection and safety considerations for operators, Jiasu Precision Machinery has implemented the Jiasu V-850S dual exchange platformvertical machining centerSheet metal design focuses on aesthetic appearance, environmental friendliness, and ergonomic compliance. The fully sealed sheet metal design completely prevents cutting fluid and cutting fluid splashing outside the machining center, keeping the surroundings of the machining center clean.

Product model:	V-850S
Workbench (roller track)
Workbench size:	800X550 (Dual Switching Workbench)
T-slot specifications:	m16*120
Maximum load:	2*300Kg
trip
X/Y/Z axis maximum stroke:	800/500/500
Distance from spindle nose to worktable:	100~600
Distance from spindle center to column surface:	580
Spindle
Spindle taper hole:	BT40
Maximum spindle speed (standard):	8000rpm
Main shaft transmission mode (standard):	Timing belt
Knife form:	Pneumatic hydraulic cutting tool
Feed rate
Three axis cutting feed rate:	10000mm/min
Three axis fast moving speed:	25/25/25m/min
Ball screw specifications:	4010
positioning accuracy	0.01
repeatability	0.007
Knife storage compartment (optional)
Knife magazine form:	Disc type knife magazine
Tool capacity:	24
Maximum diameter of cutting tool X length:	80X200
Maximum weight of cutting tool:	7kg
Knife handle specifications:	BT40
Tool change time (knife to knife):	2.8 seconds
Servo motor
Spindle motor:	7.5/11kw
X/Y/Z-axis motor (Mitsubishi):
X/Y/Z-axis motor (FANUC):	1.8/1.8/3.0kw
X/Y/Z-axis motors (wide range):
Cooling motor:	0.49kw
General specifications
Gas source requirements:	8KG
Power capacity:	20KVA
Dimensions (length X width X height):	3.5/3.0/2.7m
Net weight (approximately):	5.8T

Jiasu Precision Machinery aims to produce advanced precision mechanical products, and through careful design and precision manufacturing, produces Jiasu brand CNC machine tools, injection pull blowing integrated machines and other products. After nearly 20 years of unremitting efforts and development, the brand has won market reputation and is widely recognized by domestic and foreign customers. We sincerely invite domestic and foreign sales agents who are interested to join our team. We will fully respect and protect the rights and interests of agents, and provide comprehensive technical guidance and after-sales service support.

Brand advantages and policy support:

1. The products have modern production bases in Guangzhou, Pearl River Delta;

2. High quality branded products, agents enjoy discounted prices and priority supply of products;

3. Assist agents in completing sales negotiations, technical guidance, and fundraising in all aspects;

4. Support from after-sales maintenance outlets across the country;

5. All levels of agents can receive annual sales performance rewards.

1. Product price: Pricing based on specific customer configurations
2. Logistics costs: negotiable
3. If you need more specific information, please contact us. Jiasu Precision Machinery will be happy to serve you!