Water bath constant temperature oscillator shaker

NegotiableUpdate on 10/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1、 Product features: 1. Temperature control range: room temperature -100 degrees Celsius

Product Details

1、 Product features:

1. Temperature control range: room temperature -100 degrees.

2. Temperature control method: microcomputer temperature control is adopted, with accurate temperature control and no overheating or overshoot phenomenon.

3. Vibration mode: reciprocating, rotary, dual function (to be selected when ordering)

4. Inner liner material: stainless steel, spring clamp, different clamps can also be designed according to requirements.

5. Shell material: Static spray coating on the surface of the cold plate for rust prevention and extended service life.

6. Motor type: Permanent magnet DC motor, small size, high power, long service life, and also has the characteristics of low noise.

7. Speed regulation method: stepless speed regulation.

8. Safety category: equipped with leakage protection, automatic power-off function, over temperature protection, and sound and light alarm.

9. Timing range: 0-120 minutes or microcomputer 0-9999 minutes with timing and normally open function.

2、 Technical parameters:

model	SHA-C	SHZ-82	SHA-B
Temperature control range	Room temperature -100 ℃
temperature control accuracy	±0.5℃
temperature fluctuation	±0.5℃
heating power	1800W
Oscillation mode	Round trip	Rotary type	Dual function of round-trip/revolving
Oscillation amplitude	20mm
speed regulation range	40-300 revolutions per minute
timing range	0-120 minutes or normally open
inner dimensions	490×390×170mm
Overall dimensions	700×550×490mm		700×550×520mm
Bottled quantity	Test tube diameter: 16 × 300 100ml × 24 200ml × 15 250ml × 12, 500ml × 6, 1000ml × 4
Total weight	38kg	40kg	48kg
power supply	220v 50Hz±10%

3、 Usage:

1. Add an appropriate amount of water to the water tank (the water level should be 2-3cm above the spring clamp) and place the reagent bottle on the spring clamp.

2. Firstly, turn on the power, turn on the heating switch, and the temperature controller will light up. At this time, click the SET function button on the temperature controller. Click the set function button on the temperature controller, and the upper row will display sp and the lower row will display the set temperature. Click the △ or ▽ button to select the desired working temperature. After setting, click the set function button again to enter the constant temperature timing setting. The upper row will display st and the lower row will display the set time. Click the ▲ or ▼ button to select the constant temperature timing time. (If no timing is required, set the time to 0) Click the set button again to exit the setting state. At this time, the temperature inside the box is running at a constant temperature according to the set temperature; After running, the buzzer will sound an alarm and stop heating.

3. Adjust the oscillation "timing knob", select the oscillation timing time (if timing is not required, adjust the timing knob to the normally open position), and then slowly adjust the "speed control knob" to the desired oscillation speed.

4. After use, adjust the speed control knob to the 0 position, turn off the power. If not in use for a long time, unplug the power, drain the water, clean and wipe it clean in a timely manner to extend its service life.

4、 Precautions for use:

1. The power socket provided by the user should have good grounding measures.
2. It is strictly prohibited to move the machine during normal operation.
3. It is strictly prohibited for objects to collide with the machine.
4. Children are strictly prohibited from approaching the machine to prevent accidents.
5. It is strictly prohibited to dry burn the water bath constant temperature oscillator without water during use.