Malfunctions and Solutions of Industrial Chemical Pulse Vacuum Cleaner

Malfunctions and solutions of industrial and chemical vacuum cleaners Pulse industrial vacuum cleaners

Malfunctions and solutions of industrial and chemical vacuum cleaners

Many times,Pulse vacuum cleanerMalfunctions are usually minor and can be resolved with caution or a basic understanding. For example, the situations mentioned in this article are easy to occur but can also be easily resolved.

1、 The noise is very loud

Some companies may find that the noise of industrial and chemical vacuum cleaners is particularly loud during the operation process, and the fundamental reason is that the bearings are worn out too much. In addition, bending, deformation, displacement of the shaft, loosening of fasteners, and loosening of fan blades can all cause the noise to increase. It can be replaced in a timely manner.

2、 Motor temperature overheating

Under normal circumstances,Pulse vacuum cleanerAfter a long period of homework, high temperatures may occur, but sometimes prolonged continuous time, severe wear of electric brushes and rectifiers can cause even higher temperatures. Therefore, it is important to note that after a long period of homework, the power should be turned off and the dust removal equipment should rest for a while. After the isothermal temperature drops, work can resume.

3、 The suction gradually decreases

Normal dust removal equipment has a very strong suction force, which can remove dust from the air. However, when there are motor failures, wear and tear, or when the dust collection chamber is full of dust or the interface seal is poor, the suction force will decrease.

4、 The casing is electrified

　　Pulse vacuum cleanerThe reason for this malfunction is that the power cord of the dust removal equipment is aging, causing ground leakage. The internal circuit of the vacuum cleaner is in contact with the casing, which is why it is electrified. Even if the power cord is replaced, it is sufficient. However, it is recommended to regularly check the power cord to avoid malfunctions caused by aging and personal injury.

Malfunctions and solutions of industrial and chemical vacuum cleaners Pulse industrial vacuum cleaners