Pulse dust collector

Pulse Dust Collector Grinding Machine Industrial Dust Collector Pulse Backblowing Industrial Dust Collector

Pulse Dust Collector Grinding Machine Industrial Dust CollectorIt is a heavy industrial vacuum cleaner with a simple operation panel, safety and convenience, and overheat, overload, and phase loss protection functions.
The motor is manufactured by Siemens OEM factory and features a dual frequency (50/60Hz) and wide voltage design to meet voltage levels in all regions of the world. By using NSK bearings, the fan can withstand higher operating temperatures and improve its reliability and service life. Enable the machine to work continuously for extended periods of time.

Pulse Dust Collector Grinding Machine Industrial Dust Collectorconfiguration

1. The YXT-300 motor is produced using an independent air cooling method, which allows the motor to work continuously for 500 hours without stopping. The powerful turbo motor ensures that the suction force remains constant from the beginning.

2. The YXT-300 has a 3-layer filtration system, and the innovative FPPR8200 filter is made of polyester material to filter 0.28 microns of dust up to 99.993%. The non-woven FP3100 filter has a filtration area of 3100 square centimeters and can filter 0.3-0.5 microns of dust up to 99.99%. The dual protection ensures that the discharged air is clean.

3. The YXT-300 is equipped with a manual dust vibration function. When the filter is clogged and the suction is insufficient, simply gently shake the dust vibration rod to clean the filter thoroughly. The entire machine is made of high-strength pure stainless steel, which is sturdy and durable, with smooth and easy to clean bucket walls, high temperature resistance, and impact resistance. It is very suitable for use in places where materials need to be recycled, such as food, medicine, and chemical industries. The rear compartment of the machine is equipped with a storage rack that can hold some accessories and tools.

4. This machine is suitable for dust removal, recycling, and supporting use in industries such as hardware, machinery, automotive, aviation, electronics, food, chemical, and pharmaceutical. Can more effectively collect ultrafine powders such as ceramic powder, spray powder, toner cartridge powder, metal powder, etc; At the same time, it can quickly clean iron filings, sand, wood chips, and a large amount of dust, and can absorb a small amount of water or oil. If a large amount of liquid needs to be absorbed, a liquid protector should be installed;

5. Can be used in conjunction with industrial high-power vacuum cleaners on production lines, equipped with manual vibration dust function. When the filter is clogged and the suction is insufficient, simply gently shake the vibration dust rod to clean the filter thoroughly.

Industrial dust collectors are suitable for cleaning iron filings from hardware processing, grinding dust, spraying dust from spray painting workshops, wood chips from furniture processing, dust from ceramic processing, supporting operations in electronic and pharmaceutical workshop assembly lines, ground grinding matching, and various factory floor cleaning that require long and heavy work.

Pulse Dust Collector Grinding Machine Industrial Dust CollectorBy using equipment such as a through pump fan, the interior of the barrel is evacuated to create a rapid increase in negative pressure. The high negative pressure causes air to quickly flow into the barrel through the air inlet. The barrel passes through a vacuum brush and vacuum tube, and the flowing air carries solid particles that need to be collected and processed into the barrel. The filter bag is connected to the air inlet, and the solids are attached to the inner surface of the filter bag. The initially filtered air passes through the gaps of the filter bag and is then filtered again by the filter element to meet the emission standards. The filtered air enters the exhaust duct through the fan or air pump's exhaust outlet and is finally discharged back into the workshop to reduce energy, especially heat loss. The higher the negative pressure, the stronger the suction force, and the wider the diameter of the suction port, the higher the flow rate. Correspondingly, the negative pressure decreases and the suction force decreases. By selecting the appropriate model, the negative pressure can be kept within a constant range to adapt to the suction and processing of different materials. The company has established a comprehensive personnel system from sales, technology to after-sales, and possesses excellent technical strength. The stability of quality has been tested over time. It is already a brand in China. The company has established branch offices in Shanghai, Beijing, Wuxi, and other cities.