10 station tape retention testing machine

10 station tape retention testing machinemakeStatic load test for tape adhesion, which tests the time that the tape can withstand under a certain adhesive area and load, in order to evaluate the durability of tape adhesion.

The working principle of this device is to vertically hang the test board with the sample attached on the test stand, and hang a weight of a specified weight at the lower end. The displacement of the sample after a certain period of time or the time of sample detachment is used to characterize the ability of the adhesive tape to resist pulling off. It is mainly suitable for conducting adhesion testing on products such as pressure-sensitive adhesive tapes, medical patches, self-adhesive labels, protective films, etc.

Temperature: Normal temperature

10 station tape retention testing machineProduct Parameters

Fixtures: 10 sets

Weight: 1KG, 10 pieces

Test steel plate: 10 pieces

Appearance: Electrostatic powder coating

Connector: 10 pieces

Timer: 10 sets, 99999.9 hours (minutes)

Machine size: 880X200X630mm

Machine weight: 60kg

Operation steps of 10 station tape retention testing machine

Place the testing machine on a sturdy and level tabletop.

Preparation of samples: Cut an appropriate length of tape, apply it to the specified SUS # 304 stainless steel test plate, and use a standard roller (2kg) to roll back and forth three times at a speed of 300mm per minute to ensure sufficient contact between the tape and the test plate.

Hang the test board with adhesive tape onto the corresponding hook of the testing machine.

Hang a weight of the specified weight (usually 1kg) downwards and start the timer at the same time.

When the tape falls off, the timer automatically stops counting and records the time to evaluate the adhesive durability of the tape.