ABS silk screen transfer ink

ABS silk screen transfer ink 1. Available materials: various hard rubber products or sheets such as ABS, acrylic, HIPS, PC, PVC, AS, PMMA, etc. 2. Ink characteristics: slow drying in ink, good leveling, even ink ejection during transfer printing, less likely to clog the screen, alcohol resistance, IPA (isopropyl alcohol) resistance, white oil resistance, adhesive resistance, suitable for screen printing and transfer printing.

1、 Product Description
1Available materialsVarious hard rubber products or sheets such as ABS, acrylic, HIPS, PC, PVC, AS, PMMA, etc.
2Ink characteristicsSlow drying in ink, good leveling, even ink ejection during transfer printing, less likely to clog the screen, resistant to alcohol, IPA (isopropyl alcohol), white electric oil, adhesive, suitable for screen printing and transfer printing.
3Other parameters：
A. Network performance: 77-120T;
B. Drying time: 5-10 minutes of natural evaporation; Practical time: Natural volatilization for 14 hours; Baking: 60 ℃ -70 ℃ for ten minutes;
C. Resistant to alcohol 500g and back and forth more than 60 times, resistant to abrasion 500g and back and forth more than 60 times, with strict testing time of self drying for 48 hours.
4Selection of diluent：
A、 Diluent: 783 slow drying diluent; UVK1 transfer printing quick drying thinner
B、 Net washing water: 718
5Precautions：
A、 The surface of the substrate should be cleaned thoroughly. Stir thoroughly before use and add about 10% diluent;
B、 Do not mix with other inks to avoid reducing the printing quality of the ink; When the mesh board is blocked, it can be cleaned with mesh washing water;
C、 When multi-color printing is required, wait for the previously printed color chart to dry for 20 minutes before proceeding to the next color printing; Be sure to wait until the ink is completely dry before packaging;
D、 Due to differences in materials, processes, injection molding conditions, and environments, quality may be affected. Therefore, a trial run should be conducted before mass use, and only after meeting quality requirements can mass printing be carried out;
E、 Be sure to wait until the ink is completely dry before packaging;
F、 After use, the ink should be sealed properly. According to climate change, please keep it away from sources of fire, ventilated, moisture-proof, and away from light for storage. The shelf life is one year.
6Emergency response measures：
A、 If it splashes into the eyes, immediately rinse with clean water. In severe cases, seek medical attention;
B、 First aid measures for fire fighting: use dry powder, foam extinguisher or sand for fire fighting;

C、 Operators must wear masks and gloves during operation.

2、 Color code and compliance("√" indicates conformity, "×" indicates non conformity, and "○" indicates undetected)

international compliance standard color code	ROHS	REACH	halogen	Ortho benzene 7P	PAHS	FDA	PFOA/PFOS	EN71-3
100 transparent oil	√	√	×	√	○	√	√	√
102 white	√	√	×	√	○	√	√	√
104 Extra white	√	√	×	√	○	√	√	√
203 Original Yellow	√	√	×	√	○	√	√	√
206 Lemon yellow	√	√	×	√	○	√	√	√
201 Middle Yellow	√	√	×	√	○	√	√	√
300 rose red	√	√	×	√	○	√	√	√
302 bright red	√	√	×	√	○	√	√	√
303 bright red	√	√	×	√	○	√	√	√
308 Peach Red	√	√	×	√	○	√	√	√
300 Vermilion	√	√	×	√	○	√	√	√
305 orange-red	√	√	×	√	○	√	√	√
401 Purple;	√	√	×	√	○	√	√	√
403 Yuan Lan	√	√	×	√	○	√	√	√
404 ultramarine	√	√	×	√	○	√	√	√
406 sky blue	√	√	×	√	○	√	√	√
408 Cui Lan	√	√	×	√	○	√	√	√
501 black	√	√	×	√	○	√	√	√
601 Extra Green	√	√	×	√	○	√	√	√
602 grass green	√	√	×	√	○	√	√	√

international compliance standard color code	ROHS	REACH	halogen	Ortho benzene 7P	PAHS	FDA	PFOA/PFOS	EN71-3
131 Fluorescent Yellow	√	√	×	√	○	√	√	√
133 Fluorescent Red	√	√	×	√	○	√	√	√
134 Fluorescent Orange	√	√	×	√	○	√	√	√
140 fluorescent green	√	√	×	√	○	√	√	√
159 Fluorescent peach	√	√	×	√	○	√	√	√
160 Fluorescent Purple Peach	√	√	×	√	○	√	√	√
877 silver oil	√	√	×	√	○	√	√	√
100N Transparent oil	√	√	√	√	√	√	√	√
102N white	√	√	√	√	√	√	√	√
203N Original Yellow	√	√	√	√	√	√	√	√
206N Lemon yellow	√	√	√	√	√	√	√	√
302N bright red	√	√	√	√	√	√	√	√
308N Purple Peach Red	√	√	√	√	√	√	√	√
401N Purple;	√	√	√	√	√	√	√	√
408N Cui Lan	√	√	√	√	√	√	√	√
501N black	√	√	√	√	√	√	√	√
602N grass green	√	√	√	√	√	√	√	√
877N silver oil	√	√	√	√	√	√	√	√

Note: Ink with color number N is halogen-free ink. The above data and instructions are for reference only. The specific quality and performance are subject to customer sample confirmation.