After sales improvement of epoxy resin gelation time tester

After sales improvement of epoxy resin gelation time tester After sales improvement of epoxy resin gelation time tester

summary:

Hang a certain shape and buoyancy in resin with a basic meaning,The driving mechanism causes it to move in a fixed amplitude in a vertical plane in a harmonic motion and is adjusted so that the plunger does indeed rise during upward movement, and freely falls at a speed no faster than harmonic motion during descent. The time from when all the curing agent is added to the resin until the resin gel can just support the downward force of the plunger and is automatically detected as the gel time.

Execution standard:

GB 12007.7-89Determination of gel Time of Epoxy Resin

Main technical parameters：

1.Control system: PLC

2.Operating interface: 7-inch color touch screen

3.plunger：The plunger is made of stainless steel material.

The length of the plunger rod is approximately100mm, with a diameter of approximately3mm

Disk diameter22.1~22.3mmThick about1.5mm.

The total mass of the suspension link between the plunger and the gel tester is16.2±0.02g。

4.Sample cylinder：Cylindrical aluminum cans,

Inner diameter 45mm，

Height ≥75mm.

Thickness of aluminum wall: 0.5mm,

5.speed：0~30r/min can be set

6.Reciprocal stroke: 12.7mm

7.Constant temperature oil bath: RT~300 ℃ ≥ 2L Temperature control accuracy: ± 1 ℃

8.Power supply: AC 220V ± 10%, 50Hz;

9.Specification: 450 * 400 * 650mm

Basic configuration:

Test host: 1 copy

Instruction manual: 1 copy

Certificate of conformity: 1 copy

Receipt: 1 copy

Power cord: 1 piece

Wrench: 1 set

Product Introduction Sample Booklet: 2 copies