BL-910 series food grade silk screen ink

BL-910 series food grade silk screen ink I Ink characteristics: low odor, high gloss, bright color, strong covering power, alcohol resistance, gasoline resistance, corrosion resistance, good screen printing and transfer printing versatility Ink composition: Refined from imported FDA food grade resin and environmentally friendly solvents Applicable materials: Main applications (PP/HIPS/POM/PA/nylon/reinforced PC/metal powder coating/metal material baked paint surface/aluminum material surface/anodized aluminum surface).

One Ink characteristics:

Low odor, high gloss, bright color, strong coverage, alcohol and gasoline resistance, corrosion resistance, good screen printing and transfer printing universality

II Ink composition:

Refined from imported FDA food grade resin and environmentally friendly solvents

III Applicable materials:

Main applications (PP/HIPS/POM/PA/nylon/reinforced PC/metal powder coating/metal material baked paint surface/aluminum material surface/anodized aluminum surface).

4 Environmental standards:

ROHS, Phtlalates (Phthalates), REACH ，FDA

Five Technical Specifications:
1. Viscosity: 8000-12000CPS;
2. Fineness: 3UM ↓, Gloss: 60 ° ↑;
3. Drying conditions: 75 ℃ -100 ℃, self drying for 25 minutes and 24 hours,
4. Pencil hardness: 2H ↑;
5. Water boiling test: It can withstand boiling for 10 hours without discoloration or oil loss, and the 100 grid test after boiling is OK.
6. Salt resistance: 24H;
7. Alcohol resistance: 99% ethanol, 1000g force, back and forth more than 100 times;
8. Wear resistance: apply 1000g force back and forth more than 100 times;
9. Mesh performance: 77T-145T mesh yarn (excluding gold and silver powder blending colors);

VI Selection of diluent:

Diluent: BL-03; Can be used in conjunction with curing agents to improve chemical resistance, such as grease, cleaning agents, etc., with an addition ratio of 10% -15%

7 Usage:
1. Mix the ink and curing agent evenly before use, and seal immediately after use (the curing agent will be added depending on the material of the product)
2. Dilute with 15% -20% diluent as needed;
3. The construction parts were not cleaned of surface oil stains and dirt before construction.
When color matching is required, it should be done after the previous color chart has dried or dried;
5. During testing, the ink layer should be fully cured first;
6. Without permission, this ink shall not be mixed or colored with other inks;
Ink with added curing agent must be used up within 6 hours to prevent hardening;
When not printing, the screen board should be cleaned immediately.
8 Emergency response measures:
1. If it splashes into the eyes, immediately rinse with clean water. In severe cases, seek medical attention;
2. Fire extinguishing first aid measures: use dry powder, foam extinguisher or sand to extinguish the fire.