Ball pressure testing device High temperature pressure testing device Steel ball indentation testing device Ball pressure tester

NegotiableUpdate on 04/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Ball pressure test device SC-QY21 ● Product overview in accordance with standards: GB2099.1-2008 25.2 and 25.3 and Figure 37, IEC60884-1 Figure 37, GB4706, IEC60335, GB4943, IEC60950 Purpose: Suitable for conducting heat resistance tests on electrical enclosures and external parts made of all insulation materials

Product Details

Ball pressure test device SC-QY21

● Product Overview

Compliant with standards: GB2099.1-2008 25.2 and 25.3 and Figure 37, IEC60884-1 Figure 37 GB4706、IEC60335、GB4943、IEC60950

Purpose: Suitable for conducting heat resistance tests on electrical enclosures and external components made of all insulation materials to verify their heat resistance performance

Sample scope: Electrical enclosures and external components made of insulating materials

Structure and Function: According to Figure 38 of GB2099 standard, the device needs to be tested with a high-temperature chamber at a temperature of 40/70/125 ± 2 ° C for 1 hour, and then immersed in cold water to cool to room temperature within 10 seconds. The measured indentation diameter should not exceed 2mm

● Technical parameters

1. Steel ball radius: SR2.5mm

2. Apply pressure: 20N ± 0.2N

3. Support block: diameter 50, length 100mm, with 1.2mm diameter temperature measuring hole, made of stainless steel