Battery needle punching and extrusion integrated testing machine

Battery needle punching and extrusion integrated testing machineThe safety performance of the battery should be verified through compression test and needle puncture test, and the battery should not ignite or explode after the test; It is also an essential testing equipment for battery manufacturers and research institutes.

According to the standard:UL1642-2005TheUL2054-2005TheSJ/T 11169-1998TheYD 1268- 2003TheSJ/T 11170-1998TheGB 8897.4-2002wait

Squeezing:ALimit the maximum pressure: 1000N～13KN(can be customized according to requirements)

• BThe diameter of the upper pressure plate is:15cm(not less than20cm²)

  Acupuncture:AThe distance between the needle tip and the lower part:The height of the battery placement plane is150mm

  BPuncture speed: 10～40mm/sSpeed (adjustable dwell time)

  CPenetration force:150～200KG

  DHigh temperature resistant steel needle:3mm～φ8mm(Two sets in total)

  Force value error: ±1%

  Unit Conversion:Kg/N/Lb

  Test power mode: hydraulic

  Fixture transmission mode:Cylinder transmission

  time delay function: 0~9999Can be set in seconds

  Limit the size of the test piece:200 X 200 X 200（mm）

  Window size:200 X 200mm(10mmThick double-layer explosion-proof glass)

  Exhaust fan port:diameter15cm(The rear of the box is equipped with an exhaust fan)

  Air supply port: There are two air supply ports on the left side of the box

  Outer box size: length79 Xwide58 Xtall197（cm）

  Explosion proof box requirements:There are four universal pulleys installed underneath,Free to move

  Explosion proof purpose:Prevent battery explosions from injuring people and things around them.

  Lighting: The top of the box is equipped with a lighting lamp

  Control box size: long33 Xwide33 Xtall104（cm）

  Machine weight: approximately250Kg

  Operating voltage: AC 3ψ5W 380V 50HZ

  Total power: 1.5KW

• 
  The above parameters are our company's standard configuration. If you need different parameters, you can contact us for consultation and quotation. We are a manufacturer and can produce equipment according to customer's parameter requirements!
  

  
  
  
  

• 

• 

•