CDZ type axial flow fan

1. Overview of CDZ Axial Flow Fan 1.1. CDZ Axial Flow Fan has the characteristics of T35-11 Axial Flow Fan. At the same time, the blades are designed with a wide forward swept equal pitch structure, which can reduce the separation of airflow on the blade surface and the formation of airflow vortices, reduce the secondary loss of airflow inside the fan, reduce the aerodynamic noise of the sound source, and stabilize the airflow

1. Overview of CDZ Axial Flow Fan

1.1 The CDZ axial flow fan has the characteristics of the T35-11 axial flow fan, and the blades are designed as a wide swept forward equal pitch structure, which can reduce the separation of airflow on the blade surface and the formation of airflow vortices, reduce the secondary loss of airflow inside the fan, reduce the aerodynamic noise of the sound source, and ensure stable airflow.

1.2. The diameter of the fan impeller ranges from 250 to 1120mm, with a total of fourteen specifications. Each specification has four blades, with an air volume of 760 to 60000m3/h and a wind pressure of 50 to 500Pa.

1.3. Product Classification

Divided by external structure: wall type, pipeline type.

According to the usage environment:

----Ordinary type: suitable for environments with non flammable, explosive, and non corrosive gases.

----Anti corrosion type: The impeller and casing are made of fiberglass, suitable for environments containing corrosive gases.

----Explosion proof type: The motor is explosion-proof and the blades are made of aluminum alloy, suitable for environments with flammable and explosive gases. The explosion-proof level is EXdllBT4.

2. Working conditions of CDZ axial flow fan

Working temperature: -20 ℃~+40 ℃;

Temperature:<90%;

Medium conditions:

----Conventional type: non corrosive, non flammable, explosive gas (dust content not exceeding 100mg/m3).

----Explosion proof type: Non corrosive, containing flammable and explosive gases (with a dust content not exceeding 100mg/m3).

----Anti corrosion type: It contains corrosive gases (without any dust).

Working power supply: three-phase, 380V/50Hz (low-power fans can be made into single-phase 220V, please specify when ordering).

3. Application of CDZ Axial Flow Fan

Fans can be widely used in industrial and mining enterprises, hotels, restaurants, museums, sports venues and other ventilation and air exchange places. They are most suitable for pipeline pressurization, air supply and exhaust, as well as ventilation and air exchange in high-rise buildings and general buildings.

4. CDZ type axial flow fan configuration

4.1. Standard Configuration

● Impeller;

● Motor;

● Machine casing (air duct, guide vanes, inner cylinder, motor bracket);

● Bottom line;

4.2. Optional parts and accessories (indicate whether to purchase when ordering)

● Vibration reduction equipment;

● Control box;

● Mesh cover;

● Docking flange;

● Shutter vents;

5. Processing technology of CDZ axial flow fan

5.1. The fan impeller is made of steel, the hub is hydraulically stretched and formed, the blades are hydraulically formed after stamping, and the blades are assembled and formed by riveting with the hub. The impeller has undergone static and dynamic balance correction, and the balance accuracy is not greater than G5.6 level.

5.2. The outer flange of the fan is made by integral flanging and spinning.

6. Performance parameters of CDZ axial flow fan