Double layer high and low temperature test chamber

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Double layer high and low temperature test box Product name: Double layer high and low temperature test box Model: WSGD-150B/2L Product introduction: The high and low temperature test box is mainly used as an equipment for testing the performance of materials in various environments and testing the heat resistance, cold resistance, and drying resistance of various materials

Product Details

Double layer high and low temperature test chamber

Product Name:Double layer high and low temperature test chamber

model:WSGD-150B/2L

Product Introduction:

The high and low temperature test chamber is mainly used as equipment to test the performance of materials in various environments and to test the heat resistance, cold resistance, and dry resistance of various materials. suitablecell、Battery packUsed for quality testing of electronic, electrical, communication, instrument, vehicle, plastic products, metal, food, chemical, building materials, medical, aerospace and other products.

Applicable standards:

1. GB2423.1-2008/IEC6008-2-1-2007 Environmental testing for electrical and electronic products Part 2: Test methods Test A: Low temperature

2. GB/T 2423.2-2008 Environmental testing for electrical and electronic products - Part 2: Test methods - Test B: High temperature

3. GJB150.3A-2009 High temperature test method

4. GJB150.4A-2009 Low temperature test method

5. GB2423.22-2008 Environmental testing for electrical and electronic products Part 2 Test methods Test Nb: Temperature change at a specified rate

6. GB/T 10589-2008 Technical Conditions for Low Temperature Test Chamber

7. GB/T10592-2008 Technical Conditions for High and Low Temperature Test Chambers

8. GB/T11158-2008 Technical Conditions for High Temperature Test Chamber

9. GB/T5170.18-2005 Test Equipment Basic Parameter Calibration Method

Control method: AdoptingBalanced temperature control system(BTC)， The induction system transmits the actual data inside the test chamber to the controller. The controller controls the SSR and multi-stage intelligent output to balance the output power of the temperature system, ensuring that the temperature inside the test chamber is fully stable and has energy-saving functions, minimizing the power consumption of the instrument and ensuring long-term stable operation of the instrument.

Basic parameters

warmlinear measureFanenclose	-40 ～ +150℃（watercold type，Air cooled type can also be made according to requirements）
temperature fluctuation	≤±0.5℃ (No load)
temperature uniformity	≤2 ℃ (unloaded, constant state)
temperature resolution	0.01℃
warmlinear measureinclined to one sidediffer from	≤±2.0℃ (When unloaded and in a constant state)
risewarmfastrate	≥3℃/min （Average load throughout the entire journey）
fallwarmfastrate	≥1.0℃/min （Average load throughout the entire journey）
inside dimensions	1. Composed of 2 chambers of the same size (2 layers), each layer has independent temperature control. 2. Single cavity size: depth x width x height 500mm x 600mm x 500mm
Inner box material	SUS304 stainless steel plate, fully welded inner box.
External material	Steel plate surfacePaint treatment
Power supply conditions	maximumpower：make an appointment11KW (note: power consumption may fluctuate with different test types and test points, this data is the maximum possible value!)! )

WEISSTECH website:

http://www.weisstech.com.cn

http://www.weiss.tech/

http://www.weiss.cx/

http://www.weiss17.com

http://www.qe-test.com