Low pressure high and low temperature humid heat test chamber

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Low pressure high and low temperature humidity test box Product name: Low pressure high and low temperature humidity test box Product model: WSATH-150C Product introduction: The low pressure high and low temperature humidity test box is used to simulate high-altitude and low pressure environments. The test products include electronics, electrical engineering, aviation, aerospace, military, automotive parts, new energy batteries, etc

Product Details

Low pressure high and low temperature humid heat test chamber

Product Name:Low pressure high and low temperature humid heat test chamber

Product model:WSATH-150C

Product Introduction:

The low-pressure high and low temperature humid heat test chamber is used to simulate high-altitude and low-pressure environments, testing products including electronics, electrical engineering, aviation, aerospace, military, automotive components, new energy batteries, etc.

The tested sample can be tested for reliability under normal pressure and negative pressure, and can meet national and military standardsHigh altitude and low-pressure testing according to IEC and other testing standards.

Applicable standards:

GB/T 2423.1-2008 Test A: Low temperature test method

GB/T 2423.2-2008 Test B: High temperature test method

GB/T2423.21-2008 Test M: Low pressure test method;

GB/T2423.22-2008 Test Nb Temperature Change Test

GB/T2423.25-2008 Test Z/AM: Low temperature/low pressure comprehensive test;

GB/T2423.26-2008 Test Z/BM: High temperature/low pressure comprehensive test;

GJB 150.2A-2009 Low pressure (altitude) test (including rapid decompression)

GJB150.3A-2009 High Temperature Test

GJB150.4A-2009 Low Temperature Test

GJB150.6A-2009 Low temperature test - Environmental test method for military equipment - Temperature altitude test

GB/T10589-2008 Technical Conditions for Low Temperature Test Chamber

GB/T 10590-2006 Technical Conditions for High, Low Temperature, and Low Pressure Test Chambers

GB/T11158-2008 Technical Conditions for High Temperature Test Chamber

Waiting for relevant standards for low-pressure high and low temperature wet heat tests.

Product parameters:

Studio Capacity（L）	150L
Studio size（mm）	wide500 x Depth 500 x Height 600
Dimensions approximately（mm）	wide850 x depth 1250 x height 1800
Whole machine weight（kg）	make an appointment700
Noise（db）	≤78
temperature range(℃)	-40 ℃~150 ℃ (air-cooled type)
temperature fluctuation(℃)	≤±0.3℃
temperature uniformity(℃)	≤2℃
Temperature deviation(℃)	≤±2℃
heating rate(K/min)	≥3.0℃/min
cooling rate(K/min)	≥1.0℃/min
Humidity range(%RH)	20%～98%RH
Humidity fluctuation(%RH)	≤±2%RH
humidity uniformity(%RH)	≤3%RH
Humidity deviation(%RH)	≤±3％RH
Pressure range（KPa）	0.5～101.3
Pressure deviation	≤± 2KPa (≥ 40KPa), ≤± 5% (2~40KPa), ≤± 0.1KPa (≤ 2KPa)
Voltage reduction time	≤60min
Pressure bearing method	Internal pressure
inner-wall material	Pressure bearing layer Pressure bearing structural shell welded from 5mm thick stainless steel plate
Reinforcing	16Mn.R steel plate
Cooling method	Compressor refrigeration
power supply	380V 50HZ

WEISSTECH website:

http://www.weisstech.com.cn

http://www.weiss.tech/

http://www.weiss.cx/

http://www.weiss17.com

http://www.qe-test.com