ES640 Charged Device Model (CDM) Testing System

NegotiableUpdate on 01/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ES640 Charged Device Model (CDM) testing system supports all mainstream CDM testing methods and standards, achieving fast and accurate positioning in a larger testing space with minimal step size. The testing space can be customized for environmental control sealing, with faster drying speed, lower operating costs, and better testing repeatability. Ultra wide measurement bandwidth of 18+GHz calibrated measurement path with DSP enhanced testing bandwidth. Equipped with 3 high-definition cameras for clear vision.

Product Details

ESDMEC Technology LLC was founded by Wei Huang in March 2011 in Rolla, Missouri, USA.ESDMEC develops ESD and EMC solutions. The company is committed to providing innovative, advanced, high-quality, and cost-effective solutions, as well as general consulting, testing services, and customized projects.The product includes charging equipment model (CDM) system, cableDischarge Event (CDE) system, ESD simulator, pulse attenuator, current probe, TEM battery for RF transmission/immunity, high-voltage DC power supply, customized high-voltage/RF design.ESDMEC Technology has been a corporate member of the ESD Association since 2012.

ES640 Charged Device Model (CDM) Testing SystemSupporting all mainstream CDM testing methods and standards, achieving fast and accurate positioning in a larger testing space with minimal step size. The testing space can be customized for environmental control sealing, with faster drying speed, lower operating costs, and better testing repeatability. Ultra wide measurement bandwidth of 18+GHz calibrated measurement path with DSP enhanced testing bandwidth. Equipped with 3 high-definition cameras for clear vision.

Charged Device Model (CDM) electrostatic discharge is a common cause of microelectronic circuit failures. CDM discharge at relatively low voltages can seriously damage or destroy sensitive devices. This situation usually occurs when electrostatic devices come into contact with metal surfaces of different potentials, with extremely fast rise times.

The ES640 Charged Device Model (CDM) testing system is a mechanized CDM testing system designed to meet the requirements of all commonly used CDM testing methods, allowing for the use of two methods: Field Induced Air Discharge (FICDM) and First Contact Method (CCDM). The system includes a computer, an environmental control room, a precision XYZ motion system, different types of CDM testing devices, and automatic testing and data analysis software.

Product Features

High resolution cameras (up to three) can easily perform pin calibration

High resolution motion control system (minimum resolution of 1 micron)

Allow batch testing of multiple devices

The CCDM method being applied for can achieve higher repeatability

A specially designed testing chamber can improve the efficiency of the drying device

■ Recyclable drying device (lower cost than nitrogen)

ES640 Charged Device Model (CDM) Testing SystemProduct Application

Universal charged device model system for packaging and wafer level testing

● Support multiple popular latest CDM methods:

ANSI/ESDA/JEDEC JS-002 (FICDM)

AEC Q100-011 Rev-D (2019 Ver. 遵循 JS-002)

AEC Q101-005 Rev-A (2019 Ver. 遵循 JS-002)

ANSI/ESD SP5.3.3 (LI-CCDM, 需要 vf-TLP )

CC-TLP (ESDA SP TBD, vf TLP required)

RP-CDM (under application)

Standard or customized solutions can be provided according to requirements

Customization of corresponding dimensions based on automatic CBM (live circuit board model) and testing plane requirements

Product Parameters

parameter	ES640-150	ES640-300	unit	Remarks
Maximum range of motion for XY axis	≥ 150 X 150	≥ 300 X 300	mm	Probe motion area
DUT maximum range	160 X 160	375 X 425	mm	Maximum DUT board size
base plate size	210 X 210	395 X 470	mm	Field board area
Maximum Z-axis travel	≥50		mm	customizable
Minimum XYZ step size	100		nm
重定位精度	≤ ±6		μm
Test voltage range	± 10 to 2000 or 4000		V	Default 2000V, customizable
Minimum voltage step	1		V
Test voltage accuracy	± 1% ± 1V		% V
XY axis field of view resolution	1920 X 1080		Pixel	Support zooming in and adjusting
Vertical field of view resolution	2592 X 1944		Pixel	Support zooming in and adjusting
Operating Temperature	10 to 40		(°C)
Operating Humidity	0 to 80		%
power supply	120-240 VAC, 50/60 Hz		VAC
power	300		W
Nitrogen or CDA pressure	10-120		PSI
Peak usage of nitrogen or CDA	0.2 cfm or 0.34 m3h
Average usage of nitrogen storage tanks	~19		hour	Continuous operation in a 40RH environment
Average usage of desiccant	~24		hour	Continuous operation in a 40RH environment

Shanghai Zhengheng Electronic Technology Co., Ltd. shzhtechWe are a diversified company that integrates the agency sales of instruments and meters, the provision of testing solutions, pre-sales and after-sales technical support, and the maintenance of instruments and meters. Committed to providing professional and complete testing solutions, technical training, and maintenance services for customers in related fields.