FLU-206A online fluoride ion sensor

NegotiableUpdate on 01/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The FLU-206A online fluoride ion sensor uses a solid membrane ion selective electrode for testing free fluoride ions in water, with temperature compensation to ensure fast, simple, accurate, and economical testing. This manual provides a detailed introduction to the technical parameters, communication protocol, and maintenance of fluoride ion sensors.

Product Details

FLU-206A online fluoride ion sensorApplication Environment Description

The FLU-206A integrated online fluoride ion sensor uses a solid membrane ion selective electrode for testing free fluoride ions in water, with temperature compensation to ensure fast, simple, accurate, and economical testing. This manual provides a detailed introduction to the technical parameters, communication protocol, and maintenance of fluoride ion sensors.

·Signal output: RS-485 bus, Modbus/RTU protocol, convenient for connecting to third-party devices such as PLCs, DCS, industrial control computers, general-purpose controllers, paperless recording instruments, or touch screens.

·The fluoride ion probe has an internal reference solution that slowly seeps out from the microporous salt bridge under a pressure of at least 100KPa (1Bar). This reference system is very stable, and the electrode life is longer than that of ordinary industrial electrodes.

·Easy to install: 3/4'NPT pipe thread, easy to sink or install in pipelines and tanks.

·IP68 protection level.

FLU-206A online fluoride ion sensor

Technical performance and specifications

1. Technical parameters

model	FLU-206A
measurement range	0～100.00mg/L
resolution	0.01mg/L
precision	± 10% or ± 1mg/L, ± 0.5 ℃
Operating Temperature	0～40℃
work pressure	＜0.1MPa
The pH range of the medium	5～8pH
temperature compensation	Automatic temperature compensation (Pt1000)
power supply	12～24VDC
signal output	RS-485(Modbus/RTU)
Shell material	POM
Installation method	3/4'NPT pipe thread, immersion installation
Cable length	5 meters, other lengths can be customized
calibration method	Two-point calibration
power consumption	0.2W@12V
Protection level	IP68

2. Dimensional drawing

FLU-206A在线氟离子传感器

Note: The sensor connector is a male M16-5 core waterproof connector