NON-406-S online nitrite nitrogen sensor

NegotiableUpdate on 01/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

NON-406-S online nitrite nitrogen sensor, made of PVC membrane based nitrate ion selective electrode, is used to test the nitrate ion content in water. It has temperature compensation to ensure fast, simple, accurate and economical testing.

Product Details

NON-406-S online nitrite nitrogen sensorApplication Environment Description

The NON-406-S integrated online nitrite nitrogen sensor is made of a PVC membrane based nitrate ion selective electrode, which is used to test the nitrate ion content in water. It has temperature compensation to ensure fast, simple, accurate, and economical testing.

·Signal output: RS-485 bus, Modbus/RTU protocol, 4-20mA current output, convenient for connecting to third-party devices such as PLC, DCS, industrial control computers, general controllers, paperless recording instruments or touch screens.

·The nitrite ion electrode has an internal reference solution that slowly seeps out from the microporous salt bridge under a pressure of at least 100KPa (1Bar). This reference system is very stable, and the electrode life is longer than that of ordinary industrial electrodes.

·Easy to install: 3/4NPT pipe thread, easy to sink or install in pipelines and tanks.

·IP68 protection level.

NON-406-S online nitrite nitrogen sensorTechnical performance and specifications

1. Technical parameters

model	NON-406-S
Range and resolution	0～10.0mg/L	0.1mg/L
precision	± 10% or ± 2mg/L, ± 0.5 ℃
Storage temperature	-5～40℃
working conditions	0～40℃，＜0.1MPa
The pH range of the medium	2.5～11pH
temperature compensation	Automatic temperature compensation (Pt1000)
power supply	12～24VDC
signal output	RS-485(Modbus/RTU) 、4-20mA
Shell material	ABS and 316L stainless steel
Installation method	3/4NPT pipe thread, immersion installation
Cable length	5 meters, other lengths can be customized
calibration method	Two-point calibration
power consumption	0.2W@12V
Protection level	IP68

2. Dimensional drawing

NON-406-S在线亚硝氮传感器

Note: The sensor connector is a male M16-5 core waterproof connector