Fully automatic plug-in testing machine

Product Introduction

Fully automatic plug-in testing machineSuitable for testing the insertion and extraction force of various connectors, equipped with an automatic centering device designed by Zhuanli, it can obtain fully accurate insertion and extraction force tests. It is set using the WINOOWs window Chinese interface, with simple and convenient operation, and all data can be stored (test conditions, displacement, curve graphs, life curve graphs, inspection reports, etc.), solving the fixture problems of various connector tests and automatically aligning male and female connectors during testing, without the problem of one-sided feeding. Optional dynamic impedance testing system, which can test the dynamic impedance and draw the load stroke impedance curve while testing the insertion and extraction force

Features:

1. The testing conditions are set by the computer screen and can be stored. Select settings from the drop-down menu or enter data directly. (including test category, measured direction of motion, load measurement range, stroke measurement range, stroke origin position, stroke origin detection, measurement speed, total number of measurements, pause time, waiting position each time, air compression frequency, etc.).

2. Can store and print graphics (load stroke curve graph load attenuation life curve graph inspection report), with overload protection function for the load element, ensuring that the load element is not damaged.

3. Simultaneously display the load stroke curve graph and the life curve graph.

4. Automatic load zero point detection and the ability to set the origin detection load value.

5. Load unit display: N, lb, gf, Kgf can be freely switched.

6. Adopting a high rigidity structural design, coupled with Panasonic servo motors, it can ensure accuracy after long-term use and is suitable for general tension compression testing and insertion and extraction force life testing.

Fully automatic plug-in testing machine

Technical Specifications

Determination of maximum load: 0-50Kg

Minimum displayed load: 0.01KG

荷重精度： 0.2% FS

Maximum measured height: 150mm

Minimum fine-tuning distance: 0.01mm

Measurement speed range: 1-150mm/min

Transmission mechanism: ball screw

Drive motor: servo motor

Exterior dimensions: 360 × 260 × 1040mm

Weight: Approximately 45kg (machine)

Power supply: AC220V 50HZ

Test project:

1. Single hole plug and unplug test for connectors

2. Connector plug-in life test

3. Connector Normal Force Test

4. Connector row insertion and extraction test

5. Connector single pin and plastic retention test

6. Can be connected to the contact impedance machine simultaneously (optional)

7. Various compression and tensile strength tests.