Hardness Tester Microhardness Tester HV-1000Z Automatic Rotary Tower

Product Overview:

HV-1000Z automatic turretMicrohardness testerSuitable for measuring the microhardness of small, thin specimens, surface coatings, and brittle materials such as glass, ceramics, agate, and gemstones, it is an ideal hardness testing instrument for material research and testing in scientific research institutions, factories, and quality supervision departments Scope of application: Heat treatment, carbonization, quenching hardening layer, surface coating, steel, non-ferrous metals, and small and thin parts

Features:

HV-1000Z automatic turretMicrohardness testerIt is a high-tech product that integrates optics, mechanics, and electronics It has good reliability, operability, and intuitivenessMicrohardness testerThe appearance is novel, controlled by a microcomputer, and the measurement of Vickers and Knoop hardness can be selected through the soft key. The strength of the measuring light source can be adjusted, and the test force holding time can be preset. The LCD display screen is used, and the hardness scale HV or HK can be selected by operating the control keys. The test force, holding time, and light source brightness can be infinitely adjusted Measure the diagonal length D1 and D2 values with a micrometer eyepiece, and press the key to display the hardness value on the LCD, which is easy to operate By inputting the diagonal length of the indentation through the panel and directly reading the hardness value on the screen, the tedious process of checking the table is simplified The microhardness tester adopts a unique indentation measurement conversion and micrometer eyepiece one-time measurement reading mechanism Easy to use, high measurement accuracy. The automatic turret structure configured makes the measurement process more automated, and the measurement speed and efficiency are faster and more convenient It can configure a photography device according to the user's special requirements, and after configuration, it can take photos of the measured indentation and material metallographic structure

Technical Specifications:

Experimental force:0.098N(10gf)、0.245N(25gf)、0.49N(50gf)、0.98N(100gf)、1.96N(200gf)、2.94(300gf)、4.90N(500gf)、9.80N(1000gf)
Test force application method:Automatic loading/unloading/holding
Magnification of measuring microscope:100 x (during observation)/400 x (during measurement)
Test force holding time:0-60s (input as needed)
Minimum detection unit per grid:0.5μm
Maximum height of specimen:65mm
Distance from the center of the pressure head to the outer wall:85mm
Host weight:About 25Kg
Power Supply:AC220V/50Hz
Dimensions (length x width x height):405×290×480mm

Standard configuration:

Host: (including automatic turret structure)

Weight shaft: 1 piece, weight: 6 pieces

Cross test bench: 1 piece, thin film clamping bench: 1 piece, flat mouth clamping bench: 1 piece, thin wire clamping bench: 1 piece

2 screwdrivers, 4 horizontal adjustment screws

10 x micrometer eyepiece: 1 piece, 10 x objective lens: 1 piece, 40 x objective lens: 1 piece

Micro Vickers hardness block: 1 high and 1 medium, respectively

Micro Vickers indenter: 1 piece

Backup fuse (0.5A): 1 piece

Power cord: 1 piece

Product certificate: 1 copy, product warranty card: 1 copy, product user manual: 1 copy

Optional attachments:

Knoop indenter (used for testing high hardness materials)
16X micrometer eyepiece (with a magnification of up to 640 times: 16X40)