High current generator device

Yangzhou Xuming Electrical Technology Co., Ltd. is located in Liubao Town, Yangzhou City, Jiangsu Province, which is an advanced town for the development of electrical industry in Jiangsu Province. The company's main products include: AC/DC test transformers, variable frequency series resonant devices, high-voltage switch mechanical characteristic testers, DC resistance testers, transformer capacity parameter testers, high current generators, circuit resistance testers, high-voltage wireless phase analyzers, DC high-voltage generators, polyimide films, mica plates, 3240 epoxy plates, safety sliding contact wires, rigid sliding contact wires, asbestos rubber tubes, environmentally friendly dust removal bags, and other related products. The company specializes in the production and processing of these products and their supporting products, and has a complete and scientific quality management system. Yangzhou Xuming Electrical Technology Co., Ltd. has been recognized by the industry for its integrity, strength, and product quality. Welcome friends from all walks of life to visit, guide and negotiate business.

XM-1000AHigh current generator deviceUsage and precautions:

1. The instrument must have a good grounding.

2. Turn on the power, turn on the switch, the red indicator light is on, and the current converter is waiting for the current to rise.

3. Rotate the voltage regulator evenly clockwise, paying attention to the output current indication on the control panel until the required high current is reached.

4. During the experiment, if any abnormal phenomenon is found, the power should be immediately cut off, and the cause should be identified before conducting the experiment.

5. After the experiment is completed, the voltage regulator must be reset to zero, the power supply must be cut off by pressing the air switch, the working power supply must be cut off, and the test wiring must be removed to ensure safety.

XM-1000AHigh current generator devicestructure

It is a specially designed and manufactured equipment for conducting current load tests and temperature rise tests on various switches, current transformers, and other electrical equipment in electrical equipment testing by the power sector and industrial and mining enterprises

Instructions for use

1. According to the electrical schematic, the working circuit, transformer casing, and control panel must be well grounded.

2. Turn on the power, the green indicator light on the control panel will turn on, press the start button, the red indicator light will turn on, and the current converter is waiting for the current to rise.

3. Rotate the voltage regulator evenly clockwise, paying attention to the output current indication on the control panel until the required high current is reached. To ensure testing accuracy, a standard ammeter can be connected in series to the instrument terminal.

4. During the experiment, if any abnormal phenomenon is found, the power should be immediately cut off, and the cause should be identified before conducting the experiment.

Panel and Function

1. High current output terminal

2. Power indicator signal light

3. Power input terminal: AC: 220V power is input from here.

4. For safety reasons, the grounding terminal should be grounded when used

5.4.1/2 LCD digital display ammeter.

6. Current output button, press this button to output high current and the output indicator light will turn on.

7. Current cut-off button, press this button to cut off high current and turn off the output indicator light.

8. High current adjustment knob.

9. The adjustment hole for ammeter calibration is used when metrological calibration of the meter is required. During calibration, simply lift the circular seal of the hole and adjust it with a small flat or clock screwdriver. After adjustment, restore the circular seal.