High voltage wireless phase analyzer

Yangzhou Xuming Electrical Technology Co., Ltd. is located in Liubao Town, Yangzhou City, Jiangsu Province, which is an advanced town for the development of electrical industry in Jiangsu Province. The company's main products include: AC/DC test transformers, variable frequency series resonant devices, high-voltage switch mechanical characteristic testers, DC resistance testers, transformer capacity parameter testers, high current generators, circuit resistance testersHigh voltage wireless phase analyzerA company specializing in the production and processing of products such as DC high-voltage generators, polyimide films, mica plates, 3240 epoxy plates, safety sliding contact wires, rigid sliding contact wires, asbestos rubber pipes, environmentally friendly dust removal bags, and their supporting products, with a complete and scientific quality management system. Yangzhou Xuming Electrical Technology Co., Ltd. has been recognized by the industry for its integrity, strength, and product quality. Welcome friends from all walks of life to visit, guide and negotiate business.

WHX seriesHigh voltage wireless phase analyzerProduct Description: How to Translate

The main advantage is the removal of the leads connecting the two power grids (power sources) at both ends, which can pass through walls and partitions (boards) at a distance of up to 20m, without being restricted by any terrain or facility structure, thus improving safety,

The operation is extremely convenient, only one person needs to operate and one person needs to supervise.

The instrument sends digital signals to the receiving end through a wireless transmission module during operation, thereby reducing interference and errors, greatly improving the performance of the instrument.

In use, first operate the receiving device on the conductor of the tested power grid, and then operate the receiving device on the conductor of the other tested power grid. If the phases of the two tested power grids are the same, repeat the language prompt: "Phase

Instructions for use

When in contact with a live wire, an audible signal can be heard while four indicator lights are on. After 5-10 seconds, LED2-4 will turn off, and the sound signal will stop the transmitter. The set working time for voltage measurement is 5-10 seconds, and the transmitter will automatically enter phase measurement. At this time, only one LED indicator light is on. If the sound and light signals continue after 5-10 seconds, it means that the battery is low and needs to be replaced.

WHX seriesHigh voltage wireless phase analyzerInstructions for Use

1. Self inspection

a. Before use, the transmitter and transmitter NO.2, as well as the receiver battery, must be fully charged. Connect one end of the self-test cable to a 220V power source and insert the other end into the transmitter and transmitter NO.2. Turn on the transmitter power switch. The transmitter must be placed at least 30cm above the ground, otherwise it will affect the receiving sensitivity.

b. Turn on the power switch of the receiver, press the test button, and the receiver will enter a 10 second countdown. When the countdown is complete, the 'in-phase' starting waveform will be displayed, and there will be lights, text, and sound prompts at the same position, indicating that the instrument can be used normally.

2. On site use

a. Before use, it is necessary to comply with the work requirements of the "Preventive Testing Regulations for Power Safety Tools".

b. Connect the transmitter and transmitter NO.2 to the insulation rod, and turn on the power switch. The transmitter indicator light will display green.

c. Turn on the power switch of the receiver, press the test button, and the receiver will enter a 10 second countdown. After the countdown is complete, connect the transmitter and transmitter NO.2 to the original and test terminals respectively. The transmitter indicator light changes from green to red.

d. When the receiver is in phase, the display is as follows:

1. The waveform starts at the same position.

2. The phase angle difference is displayed as' 0 'or' 360 '.

3. Text indicates' same phase '.

4. The same phase indicator light is on (the power indicator light, transmitter, and transmitter NO.2 indicator light are all on).

5. Sound prompts.