Insulated boots and gloves voltage tester/safety tool

Insulated boots and gloves voltage tester/safety toolThe testing machine consists of three main parts: the body, remote control, and specimen container. The specimen container is made of stainless steel, with a reasonable structure and beautiful appearance. The body is coated with electrostatic spraying to prevent moisture and corrosion? Remote control is used for remote operation.

Instrument features:
1. The voltage tester for insulated boots and gloves can be remotely controlled to increase or decrease the test voltage, and can also be remotely controlled to stop

2Insulated boots and gloves voltage tester/safety toolAfter the testing process is completed, the voltage reduction process is automatically completed
3. The insulation boot glove voltage tester has overvoltage protection function

4. The insulation boot glove voltage tester adopts remote control automation operation, high and low voltage separation, safe and reliable

5. The insulated boots and gloves voltage tester uses a stainless steel container and can simultaneously detect 1? 6 test pieces

6. The insulated boot glove voltage tester has dual overcurrent protection functions on both the low and high voltage sides

Technical parameters:
Model: NYZ 220V class 50kV/1.5kVA
Power supply: 220V ± 10%, 50Hz ± 5%
Voltage regulator output: 0? 250V,4A
Transformer output: 0? Measurement accuracy of 50kV/1.5kVA high-voltage meter: ± (1.0% 5D)
Measurement accuracy of ammeter: ± (1.0% 5D) Temperature: -10 ° C? 40℃
Humidity: ≤ 60% RH, altitude: below 1000m

Maintenance and upkeep:

After using the device, the water in the sink should be drained completely.

If not used for a long time, the inside and outside of the sink should be kept dry, and the electrode rod and insulation rod should be free of moisture.

Before use, the insulation resistance of the insulation rod should be measured, and if necessary, the withstand voltage value should not be lower than 20KV when tested with high voltage.