-
E-mail
lyboiler@163.com
-
Phone
1580901009
-
Address
Linyi City, Shandong Province
Shandong Tiancheng Boiler Installation Co., Ltd
lyboiler@163.com
1580901009
Linyi City, Shandong Province

Shandong Huayuan Boiler Co., Ltd. produces LC series (burning straw, rice husk, reed residue, plastic skin, wood chips, etc.) solid waste incineration boilers (biomass boilers), which are developed on the basis of the original paper mill waste incineration boilers. The industrial waste generated in the paper industry production process, such as grass residue, waste plastic skin, sludge, etc., has long been stored in the open air inside or outside the factory. Grass residue and waste plastic skin are lightweight, large in volume, and occupy a large area. They are easily blown up by the wind, polluting the environment, and are also highly flammable, posing a fire hazard to the surrounding environment. These industrial wastes are piled up for a long time and will also pollute the surrounding water quality and soil, which is an urgent problem that various paper industries need to solve.
The industrial waste such as grass residue, plastic waste, and dried sludge from the paper mill are incinerated as fuel for the boiler. The high-temperature flue gas generated after combustion is used to produce steam, which can then be used in the paper production process, saving energy and turning waste into treasure. The volume of incineration waste is greatly reduced, and the residue after high-temperature incineration is non-toxic and harmless. It can be directly buried or used as a comprehensive raw material for building materials, truly realizing the resource utilization, reduction, and harmless treatment of paper industry waste. The paper industry waste incineration boiler developed by Linyi Boiler Factory provides an ideal way for the comprehensive application of industrial waste in paper mills, with good energy-saving and social environmental benefits.
In 1999, Shandong Huayuan Boiler Co., Ltd. (formerly Linyi Boiler Factory) developed and produced the LC30-4-1.25-MJ solid waste incineration boiler for papermaking enterprises, which was put into operation at Shandong Huayuan Paper Group Co., Ltd. and brought abundant benefits of nearly 2 million yuan in annual efficiency to Huayuan Group. This new product, which fills the domestic gap, immediately attracted the attention of Shandong Paper Industry Group Corporation and various paper-making enterprises in the province, and was quickly promoted.
Due to the fact that the main fuel for paper mill waste incineration boilers is wheat straw residue, and with the increasing cost of coal and a large amount of agricultural straw being unrecycled and burned by farmers in rural areas, some enterprises have begun to consult the direct application of paper mill waste incineration boilers to other industrial production in non paper industries, using straw as a fuel to replace coal for combustion. This move not only recycles crop straw, but also avoids environmental pollution caused by large-scale outdoor burning of agricultural straw, while saving a lot of money due to low fuel prices. The LC series solid waste incineration boilers of Shandong Huayuan Boiler Co., Ltd. have been widely used as a result.
Shandong Huayuan Boiler Co., Ltd., after more than ten years of development and dozens of upgrades and innovations, has finally launched a new LC series (burning straw, rice husk, reed residue, plastic skin, wood chips, etc.) solid waste incineration boiler suitable for multiple industries. Nowadays, this product can be applied in many industries except for papermaking enterprises.
Product Features:
The boiler is designed as a double drum, assembled type, and the boiler room can be arranged in a single layer. It has the advantages of compact structure, large heating area, safe and reliable operation, short construction period, and low installation cost.
The furnace is equipped with a coagulation device and a cyclone combustion chamber, which reduces the content of flue gas. The tail is equipped with a flue gas purification device, and the concentration of smoke and dust emissions meets the national first-class atmospheric emission standards.
A feeding device with a reasonable structure, using a combination of mechanical and wind power for uniform and reliable feeding, with a high degree of mechanization.
This series of boilers was rated as a technology development and innovation product by Linyi Economic and Trade Commission in 1999.
Applicable enterprises:
● Paper making enterprises - incinerate straw, straw residue, reed residue, American waste, Japanese waste, national waste, and sludge.
Sugar companies - Burning sugarcane bagasse
● Board enterprises - incinerate waste wood slag, sawdust, bark, sanding powder, etc.
● Other 1- Enterprises that generate combustible solid waste.
● Other 2- Enterprises with abundant sources of biomass straw in the surrounding area.
Main performance parameters of LC series waste incineration boilers
|
Main performance parameters of LC series waste incineration biomass boilers |
|||||||||
|
Boiler model project |
LC35-5-1.25 |
LC40-5-1.25 |
LC60-6-1.25 |
LC60-8-1.25 |
LC120-12-1.25 |
||||
|
Rated evaporation capacity t/h |
5 |
4-6 |
6 |
8 |
12 |
||||
|
Rated working pressure Mpa |
1.25 |
1.25 |
1.25 |
1.25 |
1.25 |
||||
|
Steam temperature ℃ |
saturation |
saturation |
saturation |
saturation |
saturation |
||||
|
combustion mode |
Chain layer combustion |
Chain layer combustion |
Reciprocating grate |
Reciprocating grate |
Reciprocating grate |
||||
|
fuel type |
Coal and firewood |
Paper raw material waste (humidity<20% Sand content<10%) |
Paper raw material waste (humidity<20% Sand content<10%) |
Paper raw material waste (humidity<20% Sand content<10%) |
Paper raw material waste (humidity<20% Sand content<10%) |
||||
|
Stove area m 2 |
10 |
11.2 |
8.9 |
11.2 |
18 |
||||
|
Heating surface area of the body m 2 |
188.9 |
232.2 |
186 |
254.7 |
398 |
||||
|
Tail heating area m 2 |
99.3 |
99.3 |
255 |
99.3 |
100 |
||||
|
Maximum weight of the transported item t |
23 |
28 |
34 |
34 |
34 |
||||
|
Longest transport size (length x width x height) mm |
5400x2800 x3550 |
6450x3230 x3550 |
8750x3240 x3550 |
8100x3230 x3550 |
7590x2920 x3240 |
||||
|
Daily garbage processing capacity t/d |
~35 |
25~40 |
60 |
60 |
120 |
||||
|
(Biomass) |
(Plastic) |
(Biomass) |
(Biomass) |
||||||